[PATCH 1/1] ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151

[Amelie Delaunay]

Update mdma1 clients channel priority level following stm32-mdma bindings.

Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 719a4276a348..b95c46c82223 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1294,7 +1294,7 @@
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc HASH1>;
 			resets = <&rcc HASH1_R>;
-			dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
 			dma-names = "in";
 			dma-maxburst = <2>;
 			status = "disabled";
@@ -1358,8 +1358,8 @@
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
-			       <&mdma1 22 0x10 0x100008 0x0 0x0>;
+			dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
+			       <&mdma1 22 0x2 0x100008 0x0 0x0>;
 			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
-- 
2.17.1