[v9 2/2] i2c: imx: select I2C_SLAVE by default

[Oleksij Rempel]

Hi,

it makes no sense to have separate patch for it

On Mon, Nov 02, 2020 at 04:21:02PM +0800, Biwen Li wrote:
> From: Biwen Li <biwen.li at nxp.com>
> 
> Select I2C_SLAVE by default
> 
> Signed-off-by: Biwen Li <biwen.li at nxp.com>
> ---
> Change in v9:
> 	- none
> 
>  drivers/i2c/busses/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index a4f473ef4e5c..d3d9a61db76e 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -675,6 +675,7 @@ config I2C_IMG
>  config I2C_IMX
>  	tristate "IMX I2C interface"
>  	depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
> +	select I2C_SLAVE
>  	help
>  	  Say Y here if you want to use the IIC bus controller on
>  	  the Freescale i.MX/MXC, Layerscape or ColdFire processors.
> -- 
> 2.17.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |