[PATCH v5 0/4] DCMI BT656 parallel bus mode support

[Alexandre Torgue]

Hi Sakari

On 11/6/20 12:53 PM, Sakari Ailus wrote:
> Hi Alexandre,
> 
> On Thu, Nov 05, 2020 at 10:26:37AM +0100, Alexandre Torgue wrote:
>> Hi Huges
>>
>> On 11/4/20 6:32 PM, Hugues Fruchet wrote:
>>> Add support of BT656 embedded synchronization bus.
>>> This mode allows to save hardware synchro lines hsync & vsync
>>> by replacing them with synchro codes embedded in data stream.
>>> Add "bus-type" property and make it required so that there is no
>>> ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6).
>>>
>>> ===========
>>> = history =
>>> ===========
>>> version 5:
>>>     - Add revisited bindings and devicetree with explicit use of "bus-type"
>>>
>>> version 4:
>>>     - Fix typo in commit message
>>>
>>> version 3:
>>>     - Fix bus_width print to %u as per Sakari comment
>>>
>>> version 2:
>>>     - As per Sakari remark, revisit commit message and document
>>>       BT656 parallel bus mode in bindings
>>>
>>> version 1:
>>>     - Initial submission
>>>
>>> Hugues Fruchet (4):
>>>     media: stm32-dcmi: add support of BT656 bus
>>>     media: dt-bindings: media: st,stm32-dcmi: add support of BT656 bus
>>>     ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1
>>>       board
>>>     ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval
>>>       board
>>>
>>>    .../devicetree/bindings/media/st,stm32-dcmi.yaml   | 38 ++++++++++++++++++++++
>>>    arch/arm/boot/dts/stm32429i-eval.dts               |  1 +
>>>    arch/arm/boot/dts/stm32mp157c-ev1.dts              |  1 +
>>>    drivers/media/platform/stm32/stm32-dcmi.c          | 37 +++++++++++++++++++--
>>>    4 files changed, 75 insertions(+), 2 deletions(-)
>>>
>>
>> I'll take DT patches on stm32-next tree.
> 
> Just checking: that is only the two last patches in the set, or also the
> binding patch?

Usually I let drivers/subsystem maintainer taking dt-bindings patches 
with drivers patches.
(If binding changes come only with dts(i) patches I take them in my tree)

-->So yes I'll take only the last two patches.

Regards
alex