[PATCH] ASoC: mchp-spdiftx: Do not set Validity bit(s)

[Codrin Ciubotariu]

The Validity bits (bit 28) must not be set in order to have the samples
valid. Some controllers look for this bit and ignore the samples if it
is set.

Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
---
 sound/soc/atmel/mchp-spdiftx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/atmel/mchp-spdiftx.c b/sound/soc/atmel/mchp-spdiftx.c
index 82c1eecd2528..3bd350afb743 100644
--- a/sound/soc/atmel/mchp-spdiftx.c
+++ b/sound/soc/atmel/mchp-spdiftx.c
@@ -487,7 +487,6 @@ static int mchp_spdiftx_hw_params(struct snd_pcm_substream *substream,
 	}
 	mchp_spdiftx_channel_status_write(dev);
 	spin_unlock_irqrestore(&ctrl->lock, flags);
-	mr |= SPDIFTX_MR_VALID1 | SPDIFTX_MR_VALID2;
 
 	if (dev->gclk_enabled) {
 		clk_disable_unprepare(dev->gclk);
-- 
2.27.0