[PATCH V2] arm64: dts: imx8mp-evk: add CAN support

[Joakim Zhang]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk at kernel.org>
> Sent: 2020年11月2日 16:29
> To: Joakim Zhang <qiangqing.zhang at nxp.com>
> Cc: shawnguo at kernel.org; s.hauer at pengutronix.de; festevam at gmail.com;
> dl-linux-imx <linux-imx at nxp.com>; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> mkl at pengutronix.de
> Subject: Re: [PATCH V2] arm64: dts: imx8mp-evk: add CAN support
> 
> On Mon, Nov 02, 2020 at 10:16:34AM +0800, Joakim Zhang wrote:
> > Add CAN device node and pinctrl on i.MX8MP evk board.
> >
> > Signed-off-by: Joakim Zhang <qiangqing.zhang at nxp.com>
> > ---
> > ChangeLogs:
> > V1->V2:
> > 	* add missing space before '=',
> > 	fsl,clk-source= /bits/ 8 <0> -> fsl,clk-source = /bits/ 8 <0>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 62
> ++++++++++++++++++++
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi    | 30 ++++++++++
> >  2 files changed, 92 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > index 908b92bb4dcd..b10dce8767a4 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -33,6 +33,28 @@
> >  		      <0x1 0x00000000 0 0xc0000000>;
> >  	};
> >
> > +	reg_can1_stby: regulator-can1-stby {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "can1-stby";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_flexcan1_reg>;
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> > +
> > +	reg_can2_stby: regulator-can2-stby {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "can2-stby";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_flexcan2_reg>;
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> > +
> >  	reg_usdhc2_vmmc: regulator-usdhc2 {
> >  		compatible = "regulator-fixed";
> >  		pinctrl-names = "default";
> > @@ -45,6 +67,20 @@
> >  	};
> >  };
> >
> > +&flexcan1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_flexcan1>;
> > +	xceiver-supply = <&reg_can1_stby>;
> > +	status = "okay";
> > +};
> > +
> > +&flexcan2 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_flexcan2>;
> > +	xceiver-supply = <&reg_can2_stby>;
> > +	status = "disabled";/* can2 pin conflict with pdm */ };
> > +
> >  &fec {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&pinctrl_fec>;
> > @@ -144,6 +180,32 @@
> >  		>;
> >  	};
> >
> > +	pinctrl_flexcan1: flexcan1grp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX          0x154
> > +			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX          0x154
> > +		>;
> > +	};
> > +
> > +	pinctrl_flexcan2: flexcan2grp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
> > +			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
> > +		>;
> > +	};
> > +
> > +	pinctrl_flexcan1_reg: flexcan1reggrp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154   /*
> CAN1_STBY */
> > +		>;
> > +	};
> > +
> > +	pinctrl_flexcan2_reg: flexcan2reggrp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154
> /* CAN2_STBY */
> > +		>;
> > +	};
> > +
> >  	pinctrl_gpio_led: gpioledgrp {
> >  		fsl,pins = <
> >  			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 479312293036..ecccfbb4f5ad 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -552,6 +552,36 @@
> >  				status = "disabled";
> >  			};
> >
> > +			flexcan1: can at 308c0000 {
> > +				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
> 
> Undocumented compatible in
> Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

Hi Krzsztof,

Yes, I will resend the patch after below patch goes into mainline. Thanks.
https://www.spinics.net/lists/linux-can/msg04896.html


Best Regards,
Joakim Zhang
> Best regards,
> Krzysztof
> 
> > +				reg = <0x308c0000 0x10000>;
> > +				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> > +					 <&clk IMX8MP_CLK_CAN1_ROOT>;
> > +				clock-names = "ipg", "per";
> > +				assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> > +				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> > +				assigned-clock-rates = <40000000>;
> > +				fsl,clk-source = /bits/ 8 <0>;
> > +				fsl,stop-mode = <&gpr 0x10 4>;
> > +				status = "disabled";
> > +			};
> > +
> > +			flexcan2: can at 308d0000 {
> > +				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
> > +				reg = <0x308d0000 0x10000>;
> > +				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> > +					 <&clk IMX8MP_CLK_CAN2_ROOT>;
> > +				clock-names = "ipg", "per";
> > +				assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> > +				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> > +				assigned-clock-rates = <40000000>;
> > +				fsl,clk-source = /bits/ 8 <0>;
> > +				fsl,stop-mode = <&gpr 0x10 5>;
> > +				status = "disabled";
> > +			};
> > +
> >  			crypto: crypto at 30900000 {
> >  				compatible = "fsl,sec-v4.0";
> >  				#address-cells = <1>;
> > --
> > 2.17.1
> >