[EXT] Re: [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible

[Fabio Estevam]

Hi Andy,

On Tue, Jun 30, 2020 at 3:36 AM Andy Duan <fugang.duan at nxp.com> wrote:

> Fabio, our QA double verify 5.4.24_2.1.0, no matter SD boot or tftp/nfs boot,
> both work fine on i.MX6QP sabresd board,  please double check your environment.

Is static IP or DHCP used on these tests?

I have an SCH-28857 REV A2 imx6qp sabresd board here and "udhcpc -i
eth0" fails 100% of the times if GPR5[9] is set.