[PATCH v5 03/10] iommu/mediatek: Modify the usage of mtk_iommu_plat_data structure

[Chao Hao]

Given the fact that we are adding more and more plat_data bool values,
it would make sense to use a u32 flags register and add the appropriate
macro definitions to set and check for a flag present.
No functional change.

Suggested-by: Matthias Brugger <matthias.bgg at gmail.com>
Signed-off-by: Chao Hao <chao.hao at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 23 ++++++++++++-----------
 drivers/iommu/mtk_iommu.h | 16 ++++++++++------
 2 files changed, 22 insertions(+), 17 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 88d3df5b91c2..8f81df6cbe51 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -563,7 +563,8 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 			 upper_32_bits(data->protect_base);
 	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
 
-	if (data->enable_4GB && data->plat_data->has_vld_pa_rng) {
+	if (data->enable_4GB &&
+	    MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
 		/*
 		 * If 4GB mode is enabled, the validate PA range is from
 		 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
@@ -573,7 +574,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
 
-	if (data->plat_data->reset_axi) {
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) {
 		/* The register is called STANDARD_AXI_MODE in this case */
 		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
 	}
@@ -618,7 +619,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 
 	/* Whether the current dram is over 4GB */
 	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
-	if (!data->plat_data->has_4gb_mode)
+	if (!MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
 		data->enable_4GB = false;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -631,7 +632,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 	if (data->irq < 0)
 		return data->irq;
 
-	if (data->plat_data->has_bclk) {
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)) {
 		data->bclk = devm_clk_get(dev, "bclk");
 		if (IS_ERR(data->bclk))
 			return PTR_ERR(data->bclk);
@@ -763,23 +764,23 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
 
 static const struct mtk_iommu_plat_data mt2712_data = {
 	.m4u_plat     = M4U_MT2712,
-	.has_4gb_mode = true,
-	.has_bclk     = true,
-	.has_vld_pa_rng   = true,
+	.flags        = HAS_4GB_MODE |
+			HAS_BCLK |
+			HAS_VLD_PA_RNG,
 	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
 };
 
 static const struct mtk_iommu_plat_data mt8173_data = {
 	.m4u_plat     = M4U_MT8173,
-	.has_4gb_mode = true,
-	.has_bclk     = true,
-	.reset_axi    = true,
+	.flags	      = HAS_4GB_MODE |
+			HAS_BCLK |
+			RESET_AXI,
 	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
 };
 
 static const struct mtk_iommu_plat_data mt8183_data = {
 	.m4u_plat     = M4U_MT8183,
-	.reset_axi    = true,
+	.flags        = RESET_AXI,
 	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 1b6ea839b92c..7cc39f729263 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -17,6 +17,15 @@
 #include <linux/spinlock.h>
 #include <soc/mediatek/smi.h>
 
+#define HAS_4GB_MODE			BIT(0)
+/* HW will use the EMI clock if there isn't the "bclk". */
+#define HAS_BCLK			BIT(1)
+#define HAS_VLD_PA_RNG			BIT(2)
+#define RESET_AXI			BIT(3)
+
+#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
+		((((pdata)->flags) & (_x)) == (_x))
+
 struct mtk_iommu_suspend_reg {
 	u32				misc_ctrl;
 	u32				dcm_dis;
@@ -36,12 +45,7 @@ enum mtk_iommu_plat {
 
 struct mtk_iommu_plat_data {
 	enum mtk_iommu_plat m4u_plat;
-	bool                has_4gb_mode;
-
-	/* HW will use the EMI clock if there isn't the "bclk". */
-	bool                has_bclk;
-	bool                has_vld_pa_rng;
-	bool                reset_axi;
+	u32                 flags;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
 };
 
-- 
2.18.0