[PATCH] dmaengine: stm32-dmamux: fix pm_runtime_get_sync fialure cases

[Vinod Koul]

On 03-06-20, 14:36, Navid Emamdoost wrote:

s/fialure/failure

> Calling pm_runtime_get_sync increments the counter even in case of
> failure, causing incorrect ref count. Call pm_runtime_put_sync if
> pm_runtime_get_sync fails.
> 
> Signed-off-by: Navid Emamdoost <navid.emamdoost at gmail.com>
> ---
>  drivers/dma/stm32-dmamux.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
> index 12f7637e13a1..ab250d7eed29 100644
> --- a/drivers/dma/stm32-dmamux.c
> +++ b/drivers/dma/stm32-dmamux.c
> @@ -140,6 +140,7 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
>  	ret = pm_runtime_get_sync(&pdev->dev);
>  	if (ret < 0) {
>  		spin_unlock_irqrestore(&dmamux->lock, flags);
> +		pm_runtime_put_sync(&pdev->dev);

why put_sync()

>  		goto error;
>  	}
>  	spin_unlock_irqrestore(&dmamux->lock, flags);
> @@ -340,8 +341,10 @@ static int stm32_dmamux_suspend(struct device *dev)
>  	int i, ret;
>  
>  	ret = pm_runtime_get_sync(dev);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		pm_runtime_put_sync(dev);

here too

>  		return ret;
> +	}
>  
>  	for (i = 0; i < stm32_dmamux->dma_requests; i++)
>  		stm32_dmamux->ccr[i] = stm32_dmamux_read(stm32_dmamux->iomem,
> -- 
> 2.17.1

-- 
~Vinod