[PATCH] media: i2c: imx290: replace msleep(10) with usleep_range(10000, 11000)

[Andrey Konovalov]

This fixes checkpatch warnings of "msleep < 20ms can sleep for up to 20ms".

Signed-off-by: Andrey Konovalov <andrey.konovalov at linaro.org>
---
 drivers/media/i2c/imx290.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 9c97830164e9..adcddf3204f7 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -406,7 +406,7 @@ static int imx290_set_register_array(struct imx290 *imx290,
 	}
 
 	/* Provide 10ms settle time */
-	msleep(10);
+	usleep_range(10000, 11000);
 
 	return 0;
 }
@@ -484,14 +484,14 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
 		if (ctrl->val) {
 			imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00);
 			imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00);
-			msleep(10);
+			usleep_range(10000, 11000);
 			imx290_write_reg(imx290, IMX290_PGCTRL,
 					 (u8)(IMX290_PGCTRL_REGEN |
 					 IMX290_PGCTRL_THRU |
 					 IMX290_PGCTRL_MODE(ctrl->val)));
 		} else {
 			imx290_write_reg(imx290, IMX290_PGCTRL, 0x00);
-			msleep(10);
+			usleep_range(10000, 11000);
 			if (imx290->bpp == 10)
 				imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW,
 						 0x3c);
-- 
2.17.1