[PATCH v7 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings

Ben Levinsky ben.levinsky at xilinx.com
Fri Jul 31 12:47:53 EDT 2020


Add binding for ZynqMP R5 OpenAMP.

Represent the RPU domain resources in one device node. Each RPU
processor is a subnode of the top RPU domain node.

Signed-off-by: Ben Levinsky <ben.levinsky at xilinx.com>
Signed-off-by: Jason Wu <j.wu at xilinx.com>
Signed-off-by: Wendy Liang <jliang at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
v3:
- update zynqmp_r5 yaml parsing to not raise warnings for extra
  information in children of R5 node. The warning "node has a unit
  name, but no reg or ranges property" will still be raised though 
  as this particular node is needed to describe the
  '#address-cells' and '#size-cells' information.
v4::
- remove warning '/example-0/rpu at ff9a0000/r5 at 0: 
  node has a unit name, but no reg or ranges property'
  by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
v6:
- remove coupling TCM nodes with remoteproc 
- remove mailbox as it is optional not needed
v7:
- change lockstep-mode to xlnx,cluster-mode
---
 .../xilinx,zynqmp-r5-remoteproc.yaml          | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
new file mode 100644
index 000000000000..54f916d9b037
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx R5 remote processor controller bindings
+
+description:
+  This document defines the binding for the remoteproc component that loads and
+  boots firmwares on the Xilinx Zynqmp and Versal family chipset.
+
+  Note that the Linux has global addressing view of the R5-related memory (TCM)
+  so the absolute address ranges are provided in TCM reg's.
+maintainers:
+  - Ed Mooring <ed.mooring at xilinx.com>
+  - Ben Levinsky <ben.levinsky at xilinx.com>
+
+properties:
+  compatible:
+    const: "xlnx,zynqmp-r5-remoteproc-1.0"
+
+  xlnx,cluster-mode:
+    description:
+      R5 core configuration (split is 0 or lock-step and 1)
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping for remoteproc IPI. It is required if the
+      user uses the remoteproc driver with the RPMsg kernel driver.
+    maxItems: 6
+
+  memory-region:
+    description:
+      collection of memory carveouts used for elf-loading and inter-processor
+      communication.
+    maxItems: 4
+    minItems: 4
+  pnode-id:
+    maxItems: 1
+  mboxes:
+    maxItems: 2
+  mbox-names:
+    maxItems: 2
+
+examples:
+  - |
+     reserved-memory {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+          elf_load: rproc at 3ed000000 {
+               no-map;
+               reg = <0x3ed00000 0x40000>;
+          };
+     };
+     rpu {
+          compatible = "xlnx,zynqmp-r5-remoteproc-1.0";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+          xlnx,cluster-mode = <0>;
+          r5_0 {
+               ranges;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               memory-region = <&elf_load>;
+               pnode-id = <0x7>;
+          };
+     };
+
+...
-- 
2.17.1




More information about the linux-arm-kernel mailing list