(EXT) Re: [PATCH] arm: dts: imx7: add QSPI

[Matthias Schiffer]

On Tue, 2020-07-28 at 15:51 +0200, Marco Felsch wrote:
> Hi Matthias,
> 
> thanks for the patch.
> 
> On 20-07-28 13:28, Matthias Schiffer wrote:
> > In preparation for an update of the TQ-Systems TQMa7x/MBa7x DTS,
> > add the
> > QSPI controller to imx7s.dtsi.
> > 
> > Based-on-patch-by: Han Xu <han.xu at nxp.com>
> > Signed-off-by: Matthias Schiffer <matthias.schiffer at ew.tq-group.com
> > >
> > ---
> >  arch/arm/boot/dts/imx7s.dtsi | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx7s.dtsi
> > b/arch/arm/boot/dts/imx7s.dtsi
> > index 1cfaf410aa43..e45683e61593 100644
> > --- a/arch/arm/boot/dts/imx7s.dtsi
> > +++ b/arch/arm/boot/dts/imx7s.dtsi
> > @@ -1162,6 +1162,19 @@
> >  				status = "disabled";
> >  			};
> >  
> > +			qspi1: spi at 30bb0000 {
> 
> Are there more controllers and why not using "qspi at 30bb0000" as node
> name?

The vast majority of QSPI controllers use spi@ node names, qspi@ only
appears in a single example in Documentation/devicetree/bindings/, and
in no actual DTS(I) files.

There is only one controller. The label "qspi1" is chosen as this has
been in use in the linux-imx vendor kernels for years; IMHO, switching
to "qspi" would just cause unnecessary churn for dependent device
trees. I have no strong opinions on this though.

> 
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				compatible = "fsl,imx7d-qspi";
> > +				reg = <0x30bb0000 0x10000>, <0x60000000
> > 0x10000000>;
> > +				reg-names = "QuadSPI", "QuadSPI-
> > memory";
> 
> The node should begin with compatible, reg, reg-names properties.
> Pls check the current .dtsi file for examples.

Thanks, will fix.

> 
> > +				interrupts = <GIC_SPI 107
> > IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
> > +					<&clks IMX7D_QSPI_ROOT_CLK>;
> > +				clock-names = "qspi_en", "qspi";
> > +				status = "disabled";
> > +			};
> > +
> >  			sdma: sdma at 30bd0000 {
> >  				compatible = "fsl,imx7d-sdma",
> > "fsl,imx35-sdma";
> >  				reg = <0x30bd0000 0x10000>;
> 
> Regards,
>   Marco