[PATCH 0/1] usb: dwc3: meson-g12a: fix shared reset control use
Anand Moon
linux.amoon at gmail.com
Fri Jul 17 12:38:58 EDT 2020
Hi Dan,
On Fri, 17 Jul 2020 at 14:31, Anand Moon <linux.amoon at gmail.com> wrote:
>
> Hi Dan,
>
> On Wed, 15 Jul 2020 at 21:53, Anand Moon <linux.amoon at gmail.com> wrote:
> >
> > Hi Dan,
> >
> > On Wed, 15 Jul 2020 at 08:48, Dan Robertson <dan at dlrobertson.com> wrote:
> > >
> > > On Tue, Jul 14, 2020 at 08:57:35PM +0530, Anand Moon wrote:
> > > > Hi Dan,
> > > >
> > > > On Tue, 14 Jul 2020 at 19:00, Dan Robertson <dan at dlrobertson.com> wrote:
> > > > >
> > > > > Hi Anand!
> > > > >
> > > > > On Tue, Jul 14, 2020 at 12:26:57PM +0530, Anand Moon wrote:
> > > > > > hi Dan,
> > > > > >
> > > > > > On Mon, 13 Jul 2020 at 21:37, Dan Robertson <dan at dlrobertson.com> wrote:
> > > > > > >
> > > > > > > When testing suspend for another driver I noticed the following warning:
> > > > > > >
> > > > > > > WARNING: CPU: 1 PID: 5530 at drivers/reset/core.c:355 reset_control_assert+0x184/0x19c
> > > > > > > Hardware name: Hardkernel ODROID-N2 (DT)
> > > > > > > [..]
> > > > > > > pc : reset_control_assert+0x184/0x19c
> > > > > > > lr : dwc3_meson_g12a_suspend+0x68/0x7c
> > > > > > > [..]
> > > > > > > Call trace:
> > > > > > > reset_control_assert+0x184/0x19c
> > > > > > > dwc3_meson_g12a_suspend+0x68/0x7c
> > > > > > > platform_pm_suspend+0x28/0x54
> > > > > > > __device_suspend+0x590/0xabc
> > > > > > > dpm_suspend+0x104/0x404
> > > > > > > dpm_suspend_start+0x84/0x1bc
> > > > > > > suspend_devices_and_enter+0xc4/0x4fc
> > > > > > >
> > > > > > > In my limited experience and knowlege it appears that we hit this
> > > > > > > because the reset control was switched to shared and the the use
> > > > > > > of the reset control was not changed.
> > > > > > >
> > > > > > > > * Calling reset_control_assert without first calling reset_control_deassert
> > > > > > > > * is not allowed on a shared reset control. Calling reset_control_reset is
> > > > > > > > * also not allowed on a shared reset control.
> > > > > > >
> > > > > > > The above snippet from reset_control_get_shared() seems to indicate that
> > > > > > > this is due to the use of reset_control_reset() in dwc3_meson_g12a_probe()
> > > > > > > and reset_control_deassert is not guaranteed to have been called
> > > > > > > before dwc3_meson_g12a_suspend() and reset_control_assert().
> > > > > > >
> > > > > > > After some basic tests with the following patch I no longer hit the
> > > > > > > warning. Comments and critiques on the patch are welcome. If there is a
> > > > > > > reason for the current use of the reset control, I'd love to learn why!
> > > > > > > Like I said before, I have not really looked at this driver before and
> > > > > > > have verify limited experience with reset controls... Was working on
> > > > > > > another driver, hit the warning, and thought I'd take a shot at the
> > > > > > > fix :-)
> > > > > > >
> > > > > > Thanks, I was also looking into this issue
> > > > >
> > > > > Awesome!
> > > > >
> > > > > > So best Fix to this issue is to drop the call of reset_control_assert
> > > > > > from dwc3_meson_g12a_suspend
> > > > > > and drop the call of reset_control_deassert from dwc3_meson_g12a_resume
> > > > > > With these changes we do not see the warning on suspend and resume
> > > > >
> > > > > We definitely would avoid hitting the warning without the
> > > > > reset_control_(de)assert calls in suspend and resume. That is a valid use of
> > > > > the reset control, but why would that be best?
> > > > >
> > > > > From reset_control_reset():
> > > >
> > > > Before entering the suspend state the code tries to do following
> > > > clk_bulk_disable_unprepare
> > > > regulator_disable
> > > > phy_power_off
> > > > phy_exit
> > > >
> > > > After this operation it's needless to call *reset_control_assert*
> > > > I tried to move this call before all the above operations
> > > > but still no success with this.
> > >
> > > How so? Once the reset() is removed prope() and deassert() is guaranteed
> > > to have been called before suspend, like what is in the patch and similar
> > > to other uses of shared reset controllers, this is possible.
> > >
> > > > Similarly on resume we should avoid calling resume
> > > > *reset_control_deassert* earlier
> > > > as the core is just reinitializing the devices.
> > > > clk_bulk_prepare_enable
> > > > usb_init
> > > > phy_init
> > > > phy_power_on
> > > > regulator_enable
> > > > >
> > > > > > * Consumers must not use reset_control_(de)assert on shared reset lines when
> > > > > > * reset_control_reset has been used.
> > > > >
> > > > > If we use reset_control_reset() then we can not (de)assert the reset line
> > > > > on suspend/resume or any other time. Wouldn't we want to be able to
> > > > > (de)assert the reset line? And why do we no longer want to (de)assert the
> > > > > reset line on suspend/resume?
> > > > >
> > > > > > > Can you try this attached patch?
> > > > > >
> > > > > I think I had already tested something similar. Removing the (de)assert calls
> > > > > but keeping reset will definitely remove the warning, but it means we can not
> > > > > (de)assert the line. My guess is that this is not what we want, but I could be
> > > > > wrong. Thoughts, input, or references to documentation on this would be
> > > > > appreciated.
> > > > >
> > > >
> > > > As per my knowledge suspend to mem will do complete power down of the
> > > > devices with support suspend and resume feature sequentially and then it tries
> > > > to bring the device up one by one.
> > > > So it should also take care of reset lines as well.
> > >
> > > So do we only _actually_ care about the reset line in the probe? Seems like we
> > > should remove the reset controller from the structure if that is the case.
> > >
> > > Cheers,
> > >
> > > - Dan
> >
> > Sorry I am not the _expert_ in suspend/resume feature but I can debug this,
> > Certainly we need to look into whether reset controller calls are needed
> > to suspend or resume for this driver.
> >
> > First thing we need to get the RTC driver to work on Odroid N2 for
> > suspend wakeup
> > to work properly.
> > For this I have created the following patches.
> >
> > [0] https://patchwork.kernel.org/cover/11665865/
> >
> > With these patches the RTC feature for wake up is broken right now in
> > my testing.
> > Once I get something to work further I will update you.
> >
> > --Anand
>
> Sorry for the _noise_ :‑(
> This feature seems to be working fine with VRTC drivers.
> I have tested this with a pre-compiled image of Archlinux distro.
>
> [root at alarm alarm]# uname -a
> Linux alarm 5.7.8-1-ARCH #1 SMP Sun Jul 12 03:38:28 UTC 2020 aarch64 GNU/Linux
> [root at alarm alarm]# rtcwake -s 30 -m mem
> rtcwake: assuming RTC uses UTC ...
> rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Jan 1 00:10:14 1970
> [ 583.591477] PM: suspend entry (deep)
> [ 583.593737] Filesystems sync: 0.002 seconds
> [ 583.818967] Freezing user space processes ... (elapsed 0.005 seconds) done.
> [ 583.825802] OOM killer disabled.
> [ 583.828966] Freezing remaining freezable tasks ... (elapsed 0.003
> seconds) done.
> [ 583.880280] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 584.020094] PM: suspend devices took 0.190 seconds
> [ 584.070586] Disabling non-boot CPUs ...
> [ 584.075037] CPU1: shutdown
> [ 584.075223] psci: CPU1 killed (polled 0 ms)
> [ 584.097199] CPU2: shutdown
> [ 584.098546] psci: CPU2 killed (polled 0 ms)
> [ 584.115370] CPU3: shutdown
> [ 584.116500] psci: CPU3 killed (polled 0 ms)
> [ 584.128116] CPU4: shutdown
> [ 584.129235] psci: CPU4 killed (polled 10 ms)
> [ 584.140122] CPU5: shutdown
> [ 584.147289] psci: CPU5 killed (polled 0 ms)
> bl30 get wakeup sources!
> process command 00000006
> bl30 enter suspend!
> Little core clk suspend rate 1896000000
> Big core clk suspend rate 24000000
> store restore gp0 pll
> suspend_counter: 3
> Enter ddr suspend
> ddr suspend time: 16us
> alarm=31S
> process command 00000001
> GPIOA_11/13 off
> cec ver:2018/04/19
> CEC cfg:0x0000
> WAKEUP GPIO cfg:0x00000000
> use vddee new table!
> use vddee new table!
> exit_reason:0x03
> Enter ddr resume
> DMC_DRAM_STAT3: 0x544
> ddr resume time: 3188us
> store restore gp0 pll
> cfg15 33b00000
> cfg15 33b00000
> Li[ 584.148720] Enabling non-boot CPUs ...
> [ 584.149124] Detected VIPT I-cache on CPU1
> [ 584.149167] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
> [ 584.149594] CPU1 is up
> [ 584.160687] Detected VIPT I-cache on CPU2
> [ 584.160730] arch_timer: CPU2: Trapping CNTVCT access
> [ 584.160741] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
> [ 584.161327] CPU2 is up
> [ 584.177645] Detected VIPT I-cache on CPU3
> [ 584.177668] arch_timer: CPU3: Trapping CNTVCT access
> [ 584.177675] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
> [ 584.178036] CPU3 is up
> [ 584.195338] Detected VIPT I-cache on CPU4
> [ 584.195361] arch_timer: CPU4: Trapping CNTVCT access
> [ 584.195368] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
> [ 584.195762] CPU4 is up
> [ 584.213002] Detected VIPT I-cache on CPU5
> [ 584.213024] arch_timer: CPU5: Trapping CNTVCT access
> [ 584.213032] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
> [ 584.213450] CPU5 is up
> ttle core clk resume rate 1896000000
> Big core clk resume rate 50000000
> [ 584.279042] meson8b-dwmac ff3f0000.ethernet eth0: No Safety
> Features support found
> [ 584.281232] meson8b-dwmac ff3f0000.ethernet eth0: configuring for
> phy/rgmii link mode
> [ 584.401216] usb usb1: root hub lost power or was reset
> [ 584.401470] usb usb2: root hub lost power or was reset
> [ 584.655446] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
> [ 584.801108] usb 2-1: reset SuperSpeed Gen 1 USB device number 2
> using xhci-hcd
> [ 584.979632] usb 1-1: reset high-speed USB device number 2 using xhci-hcd
> [ 585.260450] usb 2-1.1: reset SuperSpeed Gen 1 USB device number 3
> using xhci-hcd
> [ 585.333303] PM: resume devices took 1.100 seconds
> [ 585.333507] OOM killer enabled.
> [ 585.335549] Restarting tasks ... done.
> [ 585.378044] PM: suspend exit
> rtcwake: read rtc alarm failed: Invalid argument
> [root at alarm alarm]#
>
> -Anand
After confirming that the suspend resume feature is working correctly
I found the solution to the reset warning on 5.8.x kernel
Please can you try this following patch.
$ cat resetwarn.patch
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c
b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 1f7f4d88ed9d..60a6f49139fd 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -730,7 +730,7 @@ static int dwc3_meson_g12a_probe(struct
platform_device *pdev)
platform_set_drvdata(pdev, priv);
- priv->reset = devm_reset_control_get_shared(dev, NULL);
+ priv->reset = devm_reset_control_get_shared(dev, "dwc3_meson");
if (IS_ERR(priv->reset)) {
ret = PTR_ERR(priv->reset);
dev_err(dev, "failed to get device reset, err=%d\n", ret);
-Anand
More information about the linux-arm-kernel
mailing list