[PATCH v2] arm: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX

[Shawn Guo]

On Wed, Jul 08, 2020 at 05:11:54PM -0700, Chris Healy wrote:
> From: Andrew Lunn <andrew at lunn.ch>
> 
> The SFF soldered onto the board expect the ports to use 1000BaseX.  It
> makes no sense to have the ports set to SGMII, since they don't even
> support that mode.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> Signed-off-by: Chris Healy <cphealy at gmail.com>

s/arm/ARM in subject prefix, and applied.