[PATCH v2 2/2] memory: samsung: exynos5422-dmc: Add module param to control IRQ mode

Lukasz Luba lukasz.luba at arm.com
Fri Jul 10 15:11:22 EDT 2020


The driver can operate in two modes relaying on devfreq monitoring
mechanism which periodically checks the device status or it can use
interrupts when they are provided by loaded Device Tree. The newly
introduced module parameter can be used to choose between devfreq
monitoring and internal interrupts without modifying the Device Tree.
It also sets devfreq monitoring as default when the parameter is not set
(also the case for default when the driver is not built as a module).

Reported-by: Willy Wolff <willy.mh.wolff.ml at gmail.com>
Signed-off-by: Lukasz Luba <lukasz.luba at arm.com>
---
 drivers/memory/samsung/exynos5422-dmc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/samsung/exynos5422-dmc.c b/drivers/memory/samsung/exynos5422-dmc.c
index e03ee35f0ab5..53bfe6b7b703 100644
--- a/drivers/memory/samsung/exynos5422-dmc.c
+++ b/drivers/memory/samsung/exynos5422-dmc.c
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/of_device.h>
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,10 @@
 #include "../jedec_ddr.h"
 #include "../of_memory.h"
 
+static int irqmode;
+module_param(irqmode, int, 0644);
+MODULE_PARM_DESC(irqmode, "Enable IRQ mode (0=off [default], 1=on)");
+
 #define EXYNOS5_DREXI_TIMINGAREF		(0x0030)
 #define EXYNOS5_DREXI_TIMINGROW0		(0x0034)
 #define EXYNOS5_DREXI_TIMINGDATA0		(0x0038)
@@ -1428,7 +1433,7 @@ static int exynos5_dmc_probe(struct platform_device *pdev)
 	/* There is two modes in which the driver works: polling or IRQ */
 	irq[0] = platform_get_irq_byname(pdev, "drex_0");
 	irq[1] = platform_get_irq_byname(pdev, "drex_1");
-	if (irq[0] > 0 && irq[1] > 0) {
+	if (irq[0] > 0 && irq[1] > 0 && irqmode) {
 		ret = devm_request_threaded_irq(dev, irq[0], NULL,
 						dmc_irq_thread, IRQF_ONESHOT,
 						dev_name(dev), dmc);
@@ -1485,7 +1490,7 @@ static int exynos5_dmc_probe(struct platform_device *pdev)
 	if (dmc->in_irq_mode)
 		exynos5_dmc_start_perf_events(dmc, PERF_COUNTER_START_VALUE);
 
-	dev_info(dev, "DMC initialized\n");
+	dev_info(dev, "DMC initialized, in irq mode: %d\n", dmc->in_irq_mode);
 
 	return 0;
 
-- 
2.17.1




More information about the linux-arm-kernel mailing list