[PATCH] arm64: dts: lx2160a: Increase configuration space size

[Wasim Khan]

From: Wasim Khan <wasim.khan at nxp.com>

lx2160a rev2 requires 4KB space for type0 and 4KB
space for type1 iATU window. Increase configuration
space size to 8KB to have sufficient space for type0
and type1 window.

Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
Reviewed-by: Li Yang <leoyang.li at nxp.com>
Acked-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index abaeb58..037c4b9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -2,7 +2,7 @@
 //
 // Device Tree Include file for Layerscape-LX2160A family SoC.
 //
-// Copyright 2018 NXP
+// Copyright 2018-2020 NXP
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -957,7 +957,7 @@
 		pcie at 3400000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -985,7 +985,7 @@
 		pcie at 3500000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1013,7 +1013,7 @@
 		pcie at 3600000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
-			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1041,7 +1041,7 @@
 		pcie at 3700000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
-			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1069,7 +1069,7 @@
 		pcie at 3800000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
-			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1097,7 +1097,7 @@
 		pcie at 3900000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
-			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-- 
2.7.4