[PATCH 6/8] arm64: dts: renesas: Initial r8a774e1 SoC device tree
Lad Prabhakar
prabhakar.mahadev-lad.rj at bp.renesas.com
Wed Jul 8 13:48:29 EDT 2020
From: Marian-Cristian Rotariu <marian-cristian.rotariu.rb at bp.renesas.com>
Basic support for the RZ/G2H SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb at bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 652 ++++++++++++++++++++++
1 file changed, 652 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
new file mode 100644
index 000000000000..6637e157ffcd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774e1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774e1-sysc.h>
+
+#define CPG_AUDIO_CLK_I R8A774E1_CLK_S0D4
+
+/ {
+ compatible = "renesas,r8a774e1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&a57_0>;
+ };
+ core1 {
+ cpu = <&a57_1>;
+ };
+ core2 {
+ cpu = <&a57_2>;
+ };
+ core3 {
+ cpu = <&a57_3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&a53_0>;
+ };
+ core1 {
+ cpu = <&a53_1>;
+ };
+ core2 {
+ cpu = <&a53_2>;
+ };
+ core3 {
+ cpu = <&a53_3>;
+ };
+ };
+ };
+
+ a57_0: cpu at 0 {
+ compatible = "arm,cortex-a57";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ dynamic-power-coefficient = <854>;
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ };
+
+ a57_1: cpu at 1 {
+ compatible = "arm,cortex-a57";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ };
+
+ a57_2: cpu at 2 {
+ compatible = "arm,cortex-a57";
+ reg = <0x2>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ };
+
+ a57_3: cpu at 3 {
+ compatible = "arm,cortex-a57";
+ reg = <0x3>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
+ };
+
+ a53_0: cpu at 100 {
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <277>;
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+ capacity-dmips-mhz = <535>;
+ };
+
+ a53_1: cpu at 101 {
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+ capacity-dmips-mhz = <535>;
+ };
+
+ a53_2: cpu at 102 {
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+ capacity-dmips-mhz = <535>;
+ };
+
+ a53_3: cpu at 103 {
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+ capacity-dmips-mhz = <535>;
+ };
+
+ L2_CA57: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc R8A774E1_PD_CA57_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc R8A774E1_PD_CA53_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rwdt: watchdog at e6020000 {
+ reg = <0 0xe6020000 0 0x0c>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ gpio0: gpio at e6050000 {
+ reg = <0 0xe6050000 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio1: gpio at e6051000 {
+ reg = <0 0xe6051000 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio2: gpio at e6052000 {
+ reg = <0 0xe6052000 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio3: gpio at e6053000 {
+ /* placeholder */
+ reg = <0 0xe6053000 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio4: gpio at e6054000 {
+ reg = <0 0xe6054000 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio5: gpio at e6055000 {
+ reg = <0 0xe6055000 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio6: gpio at e6055400 {
+ reg = <0 0xe6055400 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ gpio7: gpio at e6055800 {
+ reg = <0 0xe6055800 0 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ /* placeholder */
+ };
+
+ pfc: pin-controller at e6060000 {
+ compatible = "renesas,pfc-r8a774e1";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
+ cpg: clock-controller at e6150000 {
+ compatible = "renesas,r8a774e1-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller at e6160000 {
+ compatible = "renesas,r8a774e1-rst";
+ reg = <0 0xe6160000 0 0x0200>;
+ };
+
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a774e1-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ intc_ex: interrupt-controller at e61c0000 {
+ compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
+ };
+
+ i2c2: i2c at e6510000 {
+ reg = <0 0xe6510000 0 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ i2c4: i2c at e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0xe66d8000 0 0x40>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ hscif0: serial at e6540000 {
+ reg = <0 0xe6540000 0 0x60>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ hsusb: usb at e6590000 {
+ reg = <0 0xe6590000 0 0x200>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ usb3_phy0: usb-phy at e65ee000 {
+ reg = <0 0xe65ee000 0 0x90>;
+ #phy-cells = <0>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ avb: ethernet at e6800000 {
+ reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ can0: can at e6c30000 {
+ reg = <0 0xe6c30000 0 0x1000>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ can1: can at e6c38000 {
+ reg = <0 0xe6c38000 0 0x1000>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ pwm0: pwm at e6e30000 {
+ reg = <0 0xe6e30000 0 0x8>;
+ #pwm-cells = <2>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ scif2: serial at e6e88000 {
+ compatible = "renesas,scif-r8a774e1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 0x40>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ rcar_sound: sound at ec500000 {
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ status = "disabled";
+
+ /* placeholder */
+
+ rcar_sound,ssi {
+ ssi2: ssi-2 {
+ /* placeholder */
+ };
+ };
+ };
+
+ xhci0: usb at ee000000 {
+ reg = <0 0xee000000 0 0xc00>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ usb3_peri0: usb at ee020000 {
+ reg = <0 0xee020000 0 0x400>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ ohci0: usb at ee080000 {
+ reg = <0 0xee080000 0 0x100>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ ohci1: usb at ee0a0000 {
+ reg = <0 0xee0a0000 0 0x100>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ ehci0: usb at ee080100 {
+ reg = <0 0xee080100 0 0x100>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ ehci1: usb at ee0a0100 {
+ reg = <0 0xee0a0100 0 0x100>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ usb2_phy0: usb-phy at ee080200 {
+ reg = <0 0xee080200 0 0x700>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ usb2_phy1: usb-phy at ee0a0200 {
+ reg = <0 0xee0a0200 0 0x700>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ sdhi0: sd at ee100000 {
+ reg = <0 0xee100000 0 0x2000>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ sdhi2: sd at ee140000 {
+ reg = <0 0xee140000 0 0x2000>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ sdhi3: sd at ee160000 {
+ compatible = "renesas,sdhi-r8a774e1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller at f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
+ };
+
+ pciec0: pcie at fe000000 {
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ /* placeholder */
+ };
+
+ hdmi0: hdmi at fead0000 {
+ reg = <0 0xfead0000 0 0x10000>;
+ status = "disabled";
+
+ /* placeholder */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ };
+ port at 1 {
+ reg = <1>;
+ };
+ port at 2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ du: display at feb00000 {
+ reg = <0 0xfeb00000 0 0x80000>;
+ status = "disabled";
+
+ /* placeholder */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ };
+ port at 1 {
+ reg = <1>;
+ };
+ port at 2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ prr: chipid at fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+};
--
2.17.1
More information about the linux-arm-kernel
mailing list