[PATCH v4 31/78] drm/vc4: crtc: Clear the PixelValve FIFO during configuration

[Maxime Ripard]

Even though it's not really clear why we need to flush the PV FIFO during
the configuration even though we started by flushing it, experience shows
that without it we get a stale pixel stuck in the FIFO between the HVS and
the PV.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 13fe0e370fb3..25a77cd46b28 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -358,7 +358,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
 	if (is_dsi)
 		CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep);
 
-	CRTC_WRITE(PV_CONTROL,
+	CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR |
 		   vc4_crtc_get_fifo_full_level_bits(vc4_crtc, format) |
 		   VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
 		   VC4_SET_FIELD(pixel_rep - 1, PV_CONTROL_PIXEL_REP) |
-- 
git-series 0.9.1