[PATCH] ARM: dts: vf610-zii-dev-rev-c.dts: Configure fibre port to 1000BaseX

[Chris Healy]

The SFF soldered onto the board expects the port to use 1000BaseX.  It
makes no sense to have the port set to SGMII, since it doesn't even
support that mode.

Signed-off-by: Chris Healy <cphealy at gmail.com>
---
 arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 778e02c000d1..de79dcfd32e6 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -164,7 +164,7 @@
                     port at 9 {
                         reg = <9>;
                         label = "sff2";
-                        phy-mode = "sgmii";
+                        phy-mode = "1000base-x";
                         managed = "in-band-status";
                         sfp = <&sff2>;
                     };
--
2.21.3