net: macb: fail when there's no PHY

Alexander Dahl ada at thorsis.com
Fri Dec 4 03:28:53 EST 2020


Hello Grant,

sorry if I just hijack your conversation, but I'm curious, because we are 
using the same SoC.  Adding linux-arm-kernel to Cc for the general performance 
issues and linux-mtd for the ECC questions. O:-)

Am Donnerstag, 3. Dezember 2020, 23:20:38 CET schrieb Grant Edwards:
> On 2020-12-03, Andrew Lunn <andrew at lunn.ch> wrote:
> >> I don't think there's any way I could justify using a kernel that
> >> doesn't have long-term support.
> > 
> > 5.10 is LTS. Well, it will be, once it is actually released!
> 
> Convincing people to ship an unreleased kernel would be a whole
> 'nother bucket of worms.

+1

Judging just from the release dates of the last LTS kernels, I would have 
guessed v5.11 will get LTS.  But there has been no announcement yet and I 
suppose there will be none before release?  For ordinary users it's just like 
staring in a crystal ball, so we aim at v5.4 for our more recent hardware 
platforms. ¯\_(ツ)_/¯

> 
> It's all moot now. The decision was just made to shelve the 5.4 kernel
> "upgrade" and stick with 2.6.33 for now.
> 
> >> [It looks like we're going to have to abandon the effort to use
> >> 5.4. The performance is so bad compared to 2.6.33.7 that our product
> >> just plain won't work. We've already had remove features to the get
> >> 5.4 kernel down to a usable size, but we were prepared to live with
> >> that.]
> > 
> > Ah. Small caches?
> 
> Yep. It's An old Atmel ARM926T part (at91sam9g20) with 32KB I-cache
> and 32KB D-cache.
> 
> A simple user-space multi-threaded TCP echo server benchmark showed a
> 30-50% (depending on number of parallel connections) drop in max
> throughput. Our typical applications also show a 15-25% increase in
> CPU usage for an equivalent workload.  Another problem is high
> latencies with 5.4. A thread that is supposed to wake up every 1ms
> works reliably on 2.6.33, but is a long ways from working on 5.4.

We use the exact same SoC with kernel 4.9.220-rt143 (PREEMPT RT) currently, 
after being stuck on 2.6.36.4 for quite a while.  I did not notice significant 
performance issues, but I have to admit, we never did extensive benchmarks on 
network or CPU performance, because the workload also changed for that target.

However what gave us a lot less dropped packages was using the internal SRAM 
as DMA buffer for RX packages received by macb.  That did not make it in 
mainline however, I did not put enough effort in polishing that patch back 
when we migrated from 2.6 to 4.x.  If you're curious, it's on GitHub: 
https://github.com/LeSpocky/linux/tree/net-macb-sram-rx

> I asked on the arm kernel mailing list if this was typical/expected,
> but the post never made it past the moderator.
> 
> > The OpenWRT guys make valid complaints that the code
> > hot path of the network stack is getting too big to fit in the cache
> > of small systems. So there is a lot of cache misses and performance is
> > not good. If i remember correctly, just having netfilter in the build
> > is bad, even if it is not used.
> 
> We've already disabled absoltely everything we can and still have a
> working system. With the same features enabled, the 5.4 kernel was
> about 75% larger than a 2.6.33 kernel, so we had to trim quite a bit
> of meat to get it to boot on existing units.

Same here.  v4.9 kernel image still fits, v4.14 is already too big for some 
devices we delivered in the early days.

> We also can't get on-die ECC support for Micron NAND flash working
> with 5.4. Even it did work, we'd still have to add the ability to
> fall-back to SW ECC on read operations for the sake of backwards
> compatibility on units that were initially shipped without on-die ECC
> support enabled.

IIRC the SoC itself has issues with its ECC engine? See mainline 
at91sam9g20ek_common.dtsi for example which sets nand-ecc-mode to "soft".

The SAM9G20 Errata chapter in the complete datasheet from 2015 (Atmel-6384F) 
says two times in Section 44.1.3: "Perform the ECC computation by software."

Greets
Alex






More information about the linux-arm-kernel mailing list