[PATCH 11/12] arm64: dts: zynqmp: Add missing iommu IDs
Michal Simek
michal.simek at xilinx.com
Wed Dec 2 09:06:10 EST 2020
Add missing iommu IDs to all IPs which have IDs assigned.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 52 ++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 704696811116..14a2e69cf98b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -270,6 +270,8 @@ fpd_dma_chan1: dma at fd500000 {
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14e8>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -281,6 +283,8 @@ fpd_dma_chan2: dma at fd510000 {
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14e9>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -292,6 +296,8 @@ fpd_dma_chan3: dma at fd520000 {
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ea>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -303,6 +309,8 @@ fpd_dma_chan4: dma at fd530000 {
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14eb>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -314,6 +322,8 @@ fpd_dma_chan5: dma at fd540000 {
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ec>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -325,6 +335,8 @@ fpd_dma_chan6: dma at fd550000 {
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ed>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -336,6 +348,8 @@ fpd_dma_chan7: dma at fd560000 {
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ee>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -347,6 +361,8 @@ fpd_dma_chan8: dma at fd570000 {
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ef>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
@@ -374,6 +390,8 @@ lpd_dma_chan1: dma at ffa80000 {
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x868>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -385,6 +403,8 @@ lpd_dma_chan2: dma at ffa90000 {
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x869>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -396,6 +416,8 @@ lpd_dma_chan3: dma at ffaa0000 {
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86a>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -407,6 +429,8 @@ lpd_dma_chan4: dma at ffab0000 {
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86b>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -418,6 +442,8 @@ lpd_dma_chan5: dma at ffac0000 {
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86c>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -429,6 +455,8 @@ lpd_dma_chan6: dma at ffad0000 {
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86d>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -440,6 +468,8 @@ lpd_dma_chan7: dma at ffae0000 {
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86e>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -451,6 +481,8 @@ lpd_dma_chan8: dma at ffaf0000 {
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x86f>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
@@ -470,6 +502,8 @@ nand0: nand-controller at ff100000 {
interrupts = <0 14 4>;
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x872>;
power-domains = <&zynqmp_firmware PD_NAND>;
};
@@ -482,6 +516,8 @@ gem0: ethernet at ff0b0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
reset-names = "gem0_rst";
@@ -496,6 +532,8 @@ gem1: ethernet at ff0c0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
reset-names = "gem1_rst";
@@ -510,6 +548,8 @@ gem2: ethernet at ff0d0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
reset-names = "gem2_rst";
@@ -524,6 +564,8 @@ gem3: ethernet at ff0e0000 {
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
reset-names = "gem3_rst";
@@ -618,6 +660,8 @@ qspi: spi at ff0f0000 {
<0x0 0xc0000000 0x0 0x8000000>;
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x873>;
power-domains = <&zynqmp_firmware PD_QSPI>;
};
@@ -647,6 +691,9 @@ sata: ahci at fd0c0000 {
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
power-domains = <&zynqmp_firmware PD_SATA>;
+ #stream-id-cells = <4>;
+ iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
+ <&smmu 0x4c2>, <&smmu 0x4c3>;
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
reset-names = "sata_rst";
};
@@ -658,6 +705,8 @@ sdhci0: mmc at ff160000 {
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x870>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd0", "clk_in_sd0";
power-domains = <&zynqmp_firmware PD_SD_0>;
@@ -670,6 +719,8 @@ sdhci1: mmc at ff170000 {
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x871>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd1", "clk_in_sd1";
power-domains = <&zynqmp_firmware PD_SD_1>;
@@ -678,6 +729,7 @@ sdhci1: mmc at ff170000 {
smmu: iommu at fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
+ #iommu-cells = <1>;
status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
--
2.29.2
More information about the linux-arm-kernel
mailing list