[PATCH] ARM: dts: imx6qdl: add enet_out clk support
Marco Felsch
m.felsch at pengutronix.de
Mon Aug 31 09:30:18 EDT 2020
Like the other i-MX devices the i.MX6 family can output the enet tx
clock on the pad to feed the connected device. Add the missing clk here
to avoid local fixups like: arch/arm/boot/dts/imx6qdl-tx6.dtsi.
Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
arch/arm/boot/dts/imx6qdl.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 43edbf1156c7..e24c3102c5e3 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1043,8 +1043,9 @@
<0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>,
<&clks IMX6QDL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp";
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
fsl,stop-mode = <&gpr 0x34 27>;
status = "disabled";
};
--
2.20.1
More information about the linux-arm-kernel
mailing list