[PATCH] ARM: dts: keystone: replace status value "ok" by "okay"

[Adrian Schmutzler]

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
 arch/arm/boot/dts/keystone-k2g-evm.dts  | 2 +-
 arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
 arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 66fec5f5d081..acac242ebdf7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -159,7 +159,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy at 0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 8b3d64c913d8..a11457c7fc88 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -449,7 +449,7 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vout_pins>;
-	status = "ok";
+	status = "okay";
 
 	port {
 		dpi_out: endpoint {
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index ad4e22afe133..5e85f000acc3 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -183,7 +183,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy at 0 {
 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index e200533d26a4..a6cbff4cfe20 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -132,7 +132,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy at 0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-- 
2.20.1