[PATCH] ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays

[Alexandre Torgue]

Hi Holger

On 8/7/20 5:03 PM, Holger Assmann wrote:
> The KSZ9031 PHY skew timings for rxc/txc, originally set to achieve
> the desired phase shift between clock- and data-signal, now trigger a
> kernel warning when used in rgmii-id mode:
> 
>   *-skew-ps values should be used only with phy-mode = "rgmii"
> 
> This is because commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode
> support for the KSZ9031 PHY") now configures own timings when
> phy-mode = "rgmii-id". Device trees wanting to set their own delays
> should use phy-mode "rgmii" instead as the warning prescribes.
> 
> The "standard" timings now used with "rgmii-id" work fine on this
> board, so drop the explicit timings in the device tree and thereby
> silence the warning.
> 
> Fixes: 666b5ca85cd3 ("ARM: dts: stm32: add STM32MP1-based Linux Automation MC-1 board")
> Signed-off-by: Holger Assmann <h.assmann at pengutronix.de>
> ---
>   arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> index 5700e6b700d3..b85025d00943 100644
> --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> @@ -121,8 +121,6 @@
>   			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
>   			interrupt-parent = <&gpioa>;
>   			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
> -			rxc-skew-ps = <1860>;
> -			txc-skew-ps = <1860>;
>   			reset-assert-us = <10000>;
>   			reset-deassert-us = <300>;
>   			micrel,force-master;
> 

Applied on stm32-next.

Thanks.
Alex