[PATCH] ARM: dts: stm32: Add USB OTG support to DH PDK2

[Alexandre Torgue]

Hi

On 8/3/20 12:22 PM, Marek Vasut wrote:
> The DH PDK2 board is capable of USB OTG on the X14 USB Mini-AB connector,
> fill in the missing bits to make USB OTG possible instead of peripheral.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
>   arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
> index ffaca507ead9..aaf8de51a080 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
> @@ -304,9 +304,12 @@
>   };
>   
>   &usbotg_hs {
> -	dr_mode = "peripheral";
> -	phys = <&usbphyc_port1 0>;
> +	dr_mode = "otg";
> +	pinctrl-0 = <&usbotg_hs_pins_a>;
> +	pinctrl-names = "default";
>   	phy-names = "usb2-phy";
> +	phys = <&usbphyc_port1 0>;
> +	vbus-supply = <&vbus_otg>;
>   	status = "okay";
>   };
>   
> 

Applied on stm32-next.

Thanks.
Alex