[PATCH v2 4/8] arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs

Suman Anna s-anna at ti.com
Tue Aug 25 13:21:41 EDT 2020


Two carveout reserved memory nodes each have been added for each of the
C66x DSP remote processor devices present within the MAIN voltage domain
for the TI J721E EVM boards. These nodes are assigned to the respective
rproc device nodes as well. The first region will be used as the DMA pool
for the rproc devices, and the second region will furnish the static
carveout regions for the firmware memory.

The minimum granularity on the Cache settings on C66x DSP cores is 16 MB,
so the DMA memory regions are chosen such that they are in separate 16 MB
regions for each DSP, while reserving a total of 16 MB for each DSP and
not changing the overall DSP remoteproc carveouts.

The current carveout addresses and sizes are defined statically for each
device. The C66x DSP processors do not have an MMU, and as such require the
exact memory used by the firmwares to be set-aside. The firmware images
do not require any RSC_CARVEOUT entries in their resource tables to
allocate the memory for firmware memory segments.

The reserved memory nodes can be disabled later on if there is no use-case
defined to use the corresponding remote processor.

Signed-off-by: Suman Anna <s-anna at ti.com>
---
v2: Rebased version, memory-region property added to existing nodes
v1: https://patchwork.kernel.org/patch/11725339/

 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 28 +++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 20defa0530e5..eeffaf9bf471 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -25,6 +25,30 @@ secure_ddr: optee at 9e800000 {
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		c66_1_dma_memory_region: c66-dma-memory at a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory at a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory at a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory at a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 };
 
@@ -168,8 +192,12 @@ &mailbox0_cluster11 {
 
 &c66_0 {
 	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
 };
 
 &c66_1 {
 	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
 };
-- 
2.28.0




More information about the linux-arm-kernel mailing list