[PATCH v7 00/11] clk: imx8: add new clock binding for better pm support

Dong Aisheng dongas86 at gmail.com
Mon Aug 17 03:42:33 EDT 2020


Gently ping...

On Wed, Jul 29, 2020 at 4:04 PM Dong Aisheng <dongas86 at gmail.com> wrote:
>
> Hi Stephen,
>
> This patchset addressed all your new comments.
> Right now only Patch 2/3 still haven't got any R-b or A-b tags. So
> still need your help to review.
> All other patches already got the R-b tags.
>
> BTW, for [PATCH v7 02/11] dt-bindings: clock: imx-lpcg: add support to parse
>  clocks from device tree.
> It was reviewed by Rob/Shawn and you before, however, due to the legacy binding
> file has been removed and changed to json format.
> So this patch also updated to json format accordingly based on the
> former reviewed patch
> and need a re-review.
>
> Regards
> Aisheng
>
> On Wed, Jul 29, 2020 at 4:04 PM Dong Aisheng <aisheng.dong at nxp.com> wrote:
> >
> > This patch series is a preparation for the MX8 Architecture improvement.
> > As for IMX SCU based platforms like MX8QM and MX8QXP, they are comprised
> > of a couple of SS(Subsystems) while most of them within the same SS
> > can be shared. e.g. Clocks, Devices and etc.
> >
> > However, current clock binding is using SW IDs for device tree to use
> > which can cause troubles in writing the common <soc>-ss-xx.dtsi file for
> > different SoCs.
> >
> > This patch series aims to introduce a new binding which is more close to
> > hardware and platform independent and can makes us write a more general
> > drivers for different SCU based SoCs.
> >
> > Another important thing is that on MX8, each Clock resource is associated
> > with a power domain. So we have to attach that clock device to the power
> > domain in order to make it work properly. Further more, the clock state
> > will be lost when its power domain is completely off during suspend/resume,
> > so we also introduce the clock state save&restore mechanism.
> >
> > It's based on latest shanw/for-next branch.
> >
> > The top commit is:
> > 3c1a41dab7b8 Merge branch 'imx/defconfig' into for-next
> >
> > ChangeLog:
> > v6->v7:
> >  * addressed all comments from Stephen
> >  * rebased to latest shawn/for-next
> > v5->v6:
> >  * add scu clk unregister if add provider failed
> > v4->v5:
> >  * Address all comments from Stephen
> > v3->v4:
> >  * use clk-indices for LPCG to fetch each clks offset from dt
> > v2->v3:
> >  * change scu clk into two cells binding
> >  * add clk pm patches to ease the understand of the changes
> > v1->v2:
> >  * SCU clock changed to one cell clock binding inspired by arm,scpi.txt
> >    Documentation/devicetree/bindings/arm/arm,scpi.txt
> >  * Add required power domain property
> >  * Dropped PATCH 3&4 first, will send the updated version accordingly
> >    after the binding is finally determined,
> >
> > Dong Aisheng (11):
> >   dt-bindings: firmware: imx-scu: new binding to parse clocks from
> >     device tree
> >   dt-bindings: clock: imx-lpcg: add support to parse clocks from device
> >     tree
> >   clk: imx: scu: add two cells binding support
> >   clk: imx: scu: bypass cpu power domains
> >   clk: imx: scu: allow scu clk to take device pointer
> >   clk: imx: scu: add runtime pm support
> >   clk: imx: scu: add suspend/resume support
> >   clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
> >   clk: imx: lpcg: allow lpcg clk to take device pointer
> >   clk: imx: clk-imx8qxp-lpcg: add runtime pm support
> >   clk: imx: lpcg: add suspend/resume support
> >
> >  .../bindings/arm/freescale/fsl,scu.txt        |  12 +-
> >  .../bindings/clock/imx8qxp-lpcg.yaml          |  79 ++++--
> >  drivers/clk/imx/clk-imx8qxp-lpcg.c            | 139 +++++++++++
> >  drivers/clk/imx/clk-imx8qxp.c                 | 136 +++++-----
> >  drivers/clk/imx/clk-lpcg-scu.c                |  53 +++-
> >  drivers/clk/imx/clk-scu.c                     | 234 +++++++++++++++++-
> >  drivers/clk/imx/clk-scu.h                     |  56 ++++-
> >  include/dt-bindings/clock/imx8-lpcg.h         |  14 ++
> >  8 files changed, 620 insertions(+), 103 deletions(-)
> >  create mode 100644 include/dt-bindings/clock/imx8-lpcg.h
> >
> > --
> > 2.23.0
> >



More information about the linux-arm-kernel mailing list