[PATCH 1/2] perf: Add Arm CMN-600 DT binding

[Rob Herring]

On Wed, Aug 5, 2020 at 6:57 AM Robin Murphy <robin.murphy at arm.com> wrote:
>
> Document the requirements for the CMN-600 DT binding. The internal
> topology is almost entirely discoverable by walking a tree of ID
> registers, but sadly both the starting point for that walk and the
> exact format of those registers are configuration-dependent and not
> discoverable from some sane fixed location. Oh well.
>
> Signed-off-by: Robin Murphy <robin.murphy at arm.com>
> ---
>  .../devicetree/bindings/perf/arm-cmn.yaml     | 57 +++++++++++++++++++

arm,cmn.yaml

>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/arm-cmn.yaml
>
> diff --git a/Documentation/devicetree/bindings/perf/arm-cmn.yaml b/Documentation/devicetree/bindings/perf/arm-cmn.yaml
> new file mode 100644
> index 000000000000..167491787088
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/arm-cmn.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause)

> +# Copyright 2020 Arm Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/perf/arm-cmn.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Arm CMN (Coherent Mesh Network) Performance Monitors
> +
> +maintainers:
> +  - Robin Murphy <robin.murphy at arm.com>
> +
> +properties:
> +  compatible:
> +    const: arm,cmn-600
> +
> +  reg:
> +    items:
> +      - description: Physical address of the base (PERIPHBASE) and
> +          size (up to 64MB) of the configuration address space.
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 4
> +    items:
> +      - description: Overflow interrupt for DTC0
> +      - description: Overflow interrupt for DTC1
> +      - description: Overflow interrupt for DTC2
> +      - description: Overflow interrupt for DTC3
> +    description: One interrupt for each DTC domain implemented must
> +      be specified, in order. DTC0 is always present.
> +
> +  arm,root-node :

extra space       ^

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Offset from PERIPHBASE of the configuration
> +      discovery node (see TRM definition of ROOTNODEBASE).
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - arm,root-node
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    pmu at 50000000 {
> +        compatible = "arm,cmn-600";
> +        reg = <0x50000000 0x4000000>;
> +        /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
> +        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +        arm,root-node = <0x104000>;
> +    };
> +...
> --
> 2.28.0.dirty
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel