[PATCH 3/3] usb: Add Kconfig and Makefile changes to build brcmstb-usb-pinmap

[Al Cooper]

From: Al Cooper <al.cooper at broadcom.com>

Add Kconfig and Makefile changes to build brcmstb-usb-pinmap and
update MAINTAINERS for the new driver.

refs #SWLINUX-5537

Signed-off-by: Al Cooper <al.cooper at broadcom.com>
---
 MAINTAINERS               | 8 ++++++++
 drivers/usb/host/Kconfig  | 4 ++++
 drivers/usb/host/Makefile | 1 +
 3 files changed, 13 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index f0569cf304ca..3a44ac61899b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3527,6 +3527,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
 F:	drivers/usb/host/ehci-brcm.*
 
+BROADCOM BRCMSTB USB PIN MAP DRIVER
+M:	Al Cooper <alcooperx at gmail.com>
+L:	linux-usb at vger.kernel.org
+L:	bcm-kernel-feedback-list at broadcom.com
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
+F:	drivers/usb/host/brcmstb-usb-pinmap.c
+
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
 M:	Al Cooper <alcooperx at gmail.com>
 L:	linux-kernel at vger.kernel.org
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1cb3004ea7b2..9c285053bb0c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -109,12 +109,16 @@ endif # USB_XHCI_HCD
 config USB_EHCI_BRCMSTB
        tristate
 
+config BRCM_USB_PINMAP
+       tristate
+
 config USB_BRCMSTB
 	tristate "Broadcom STB USB support"
 	depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
 	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
 	select USB_EHCI_BRCMSTB if USB_EHCI_HCD
 	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	select BRCM_USB_PINMAP
 	help
 	  Enables support for XHCI, EHCI and OHCI host controllers
 	  found in Broadcom STB SoC's.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bc731332fed9..0e63ef94790d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -90,3 +90,4 @@ obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
 obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
 obj-$(CONFIG_USB_FOTG210_HCD)	+= fotg210-hcd.o
 obj-$(CONFIG_USB_MAX3421_HCD)	+= max3421-hcd.o
+obj-$(CONFIG_BRCM_USB_PINMAP)	+= brcmstb-usb-pinmap.o
-- 
2.17.1