[PATCH 0/8] ARM: davinci: complete the conversion to using the reset framework

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski at baylibre.com>

This series converts the only user of the handcoded, mach-specific reset
routines in the davinci platform to using the reset framework.

Patch 1 modifies the way lookup entries are registered with the reset
framework.

Patches 2-4 add necessary lookups/DT-properties.

Patches 5-7 convert the davinci-rproc driver to the reset framework.

Patch 8 removes now dead code.

Philipp: it turned out that it's indeed better to use the reset
controller's device name for the entry lookup.

Tested both in DT and legacy modes by booting the examples from
ti-ipc-rtos recipe in meta-ti.

This series applies on top of David Lechner's common-clk-v9 branch[1]
with Philipp Zabel's reset/next branch[2] pulled in.

It can be found in my github tree as well[3].

[1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9
[2] git://git.pengutronix.de/git/pza/linux reset/next
[3] git at github.com:brgl/linux.git topic/davinci-reset

Bartosz Golaszewski (8):
  reset: modify the way reset lookup works for board files
  ARM: davinci: dts: make psc0 a reset provider
  ARM: davinci: dts: add a reset control to the dsp node
  clk: davinci: add a reset lookup table for psc0
  remoteproc: da8xx: add the missing checke for clk_enable()
  remoteproc: da8xx: prepare and unprepare the clock where needed
  remoteproc: da8xx: use the reset framework
  clk: davinci: kill davinci_clk_reset_assert/deassert()

 arch/arm/boot/dts/da850.dtsi               |  2 ++
 arch/arm/mach-davinci/include/mach/clock.h | 21 ----------------
 drivers/clk/davinci/psc-da850.c            |  8 ++++++
 drivers/clk/davinci/psc.c                  | 19 +-------------
 drivers/remoteproc/da8xx_remoteproc.c      | 40 ++++++++++++++++++++++++------
 drivers/reset/core.c                       | 33 +++++++++++++++++++++---
 include/linux/reset-controller.h           |  8 +++---
 7 files changed, 78 insertions(+), 53 deletions(-)
 delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h

-- 
2.16.1