[PATCH 11/47] ARM: dts: r8a7790: sort subnodes of root node

Simon Horman horms+renesas at verge.net.au
Fri Mar 16 09:38:08 PDT 2018


Sort subnodes of root node to aid maintenance.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 arch/arm/boot/dts/r8a7790.dtsi | 104 ++++++++++++++++++++---------------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 54c5a2d7ea89..3bbcc0b93f1c 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -40,6 +40,35 @@
 		vin3 = &vin3;
 	};
 
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -158,6 +187,29 @@
 		};
 	};
 
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -1678,62 +1730,10 @@
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
 	/* External USB clock - can be overridden by the board */
 	usb_extal_clk: usb_extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
 };
-- 
2.11.0




More information about the linux-arm-kernel mailing list