[PATCH v3] mtd: nand: marvell: Fix clock resource by adding a register clock

Boris Brezillon boris.brezillon at bootlin.com
Thu Mar 15 06:56:20 PDT 2018


Hi Greg,

On Tue, 13 Mar 2018 11:30:16 +0100
Gregory CLEMENT <gregory.clement at bootlin.com> wrote:

> diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
> index c08fb477b3c6..4ee9813bf88f 100644
> --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
> @@ -14,7 +14,11 @@ Required properties:
>  - #address-cells: shall be set to 1. Encode the NAND CS.
>  - #size-cells: shall be set to 0.
>  - interrupts: shall define the NAND controller interrupt.
> -- clocks: shall reference the NAND controller clock.
> +- clocks: shall reference the NAND controller clocks, the second one is
> +  optional but needed for the Armada 7K/8K SoCs
> +- clock-names: mandatory if there is a second clock, in this case the
> +   name must be "core" for the first clock and "reg" for the second
> +   one

The order is no longer enforced in this version of the patch.

Regards,

Boris

-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com



More information about the linux-arm-kernel mailing list