[PATCH 2/5] arm64: dts: allwinner: a64: Add watchdog

[André Przywara]

On 12/03/18 16:10, Harald Geyer wrote:

Hi,

> Add a watchdog node for the A64, automatically enabled on all boards.
> Tested on Olimex Teres I.
> 
> Signed-off-by: Harald Geyer <harald at ccbib.org>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 64e452a758fa..ca1b365bc722 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -665,5 +665,11 @@
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  		};
> +
> +		wdt0: watchdog at 1c20ca0 {
> +			compatible = "allwinner,sun6i-a31-wdt";

Please use the recommended way, adding a specific compatible first:

			compatible = "allwinner,sun50i-a64-wdt",
				     "allwinner,sun6i-a31-wdt";

The rest looks correct.

I am just a bit puzzled what's the use of a watchdog on a laptop? I
would expect it being more used in embedded systems? Or is that patch
here actually independent from the Teres I?

Cheers,
Andre.

> +			reg = <0x01c20ca0 0x20>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  };
>