[PATCH v2 14/19] drm/sun4i: backend: Add support for zpos

Chen-Yu Tsai wens at csie.org
Sun Jan 28 18:01:00 PST 2018


On Mon, Jan 22, 2018 at 6:35 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Our various planes have a configurable zpos, that combined with the pipes
> allow to configure the composition.
>
> Since the interaction between the pipes, zpos and alphas framebuffers are

                                                                        ^^^ is

> not trivials, let's just enable the zpos as an immutable property for now,

       ^^^^^^^ trivial

> and use that zpos in our atomic_update part.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  drivers/gpu/drm/sun4i/sun4i_backend.c     | 15 +++++++++++++++
>  drivers/gpu/drm/sun4i/sun4i_backend.h     |  2 ++
>  drivers/gpu/drm/sun4i/sun4i_framebuffer.c |  4 ++++
>  drivers/gpu/drm/sun4i/sun4i_layer.c       |  3 +++
>  4 files changed, 24 insertions(+)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
> index a18c86a15748..c4986054909b 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
> @@ -272,6 +272,21 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
>         return 0;
>  }
>
> +int sun4i_backend_update_layer_zpos(struct sun4i_backend *backend, int layer,
> +                                   struct drm_plane *plane)
> +{
> +       struct drm_plane_state *state = plane->state;
> +       unsigned int priority = state->normalized_zpos;
> +
> +       DRM_DEBUG_DRIVER("Setting layer %d priority to %d\n", layer, priority);

You might want to make the statement less ambiguous, like

  "Setting layer %d's priority ..."

Otherwise,

Reviewed-by: Chen-Yu Tsai <wens at csie.org>


> +
> +       regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_ATTCTL_REG0(layer),
> +                          SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL_MASK,
> +                          SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL(priority));
> +
> +       return 0;
> +}
> +
>  static bool sun4i_backend_plane_uses_scaler(struct drm_plane_state *state)
>  {
>         u16 src_h = state->src_h >> 16;
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.h b/drivers/gpu/drm/sun4i/sun4i_backend.h
> index 1ca8b7db6807..04a4f11b87a8 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.h
> @@ -182,5 +182,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
>                                       int layer, struct drm_plane *plane);
>  int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
>                                         int layer, uint32_t in_fmt);
> +int sun4i_backend_update_layer_zpos(struct sun4i_backend *backend,
> +                                   int layer, struct drm_plane *plane);
>
>  #endif /* _SUN4I_BACKEND_H_ */
> diff --git a/drivers/gpu/drm/sun4i/sun4i_framebuffer.c b/drivers/gpu/drm/sun4i/sun4i_framebuffer.c
> index e68004844abe..5b3986437a50 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_framebuffer.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_framebuffer.c
> @@ -35,6 +35,10 @@ static int sun4i_de_atomic_check(struct drm_device *dev,
>         if (ret)
>                 return ret;
>
> +       ret = drm_atomic_normalize_zpos(dev, state);
> +       if (ret)
> +               return ret;
> +
>         return drm_atomic_helper_check_planes(dev, state);
>  }
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
> index 03549646528a..fbf25d59cf88 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
> @@ -115,6 +115,7 @@ static void sun4i_backend_layer_atomic_update(struct drm_plane *plane,
>         }
>
>         sun4i_backend_update_layer_coord(backend, layer->id, plane);
> +       sun4i_backend_update_layer_zpos(backend, layer->id, plane);
>         sun4i_backend_layer_enable(backend, layer->id, true);
>  }
>
> @@ -237,6 +238,8 @@ struct drm_plane **sun4i_layers_init(struct drm_device *drm,
>                         return ERR_CAST(layer);
>                 };
>
> +               drm_plane_create_zpos_immutable_property(&layer->plane, i);
> +
>                 DRM_DEBUG_DRIVER("Assigning %s plane to pipe %d\n",
>                                  i ? "overlay" : "primary", plane->pipe);
>                 regmap_update_bits(engine->regs, SUN4I_BACKEND_ATTCTL_REG0(i),
> --
> git-series 0.9.1



More information about the linux-arm-kernel mailing list