[PATCH] phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUS

Chen-Yu Tsai wens at csie.org
Fri Jan 19 01:25:41 PST 2018


The AXP223 PMIC, like the AXP221, does not generate VBUS change
interrupts when N_VBUSEN is used to drive VBUS for the OTG port
on the board.

This was not noticed until recently, as most A23/A33 boards use
a GPIO pin that does not support interrupts for OTG ID detection.
This forces the driver to use polling. However the A33-OlinuXino
uses a pin that does support interrupts, so the driver uses them.
However the VBUS interrupt never fires, and the driver never gets
to update the VBUS status. This results in musb timing out waiting
for VBUS to rise.

This was worked around for the AXP221 by resorting to polling
changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for
missing Vbus det interrupts on A31"). This patch adds the A23 and
A33 to the list of SoCs that need the workaround.

Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the
		      sun8i-a33 SoC")
Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the
		      sun8i-a23 SoC")
Cc: <stable at vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb:
		Use of_match_node to get model specific config data
Cc: <stable at vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb:
		Fix optional gpios failing probe
Cc: <stable at vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb:
		Fix irq free conditions to match request conditions
Cc: <stable at vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb:
		Add workaround for missing Vbus det interrupts on A31
Cc: <stable at vger.kernel.org> # 4.3.x
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---

This list might get longer if the newer AXP8xx PMICs also have this
behavior. We could switch to a boolean in the per-compatible data,
or just always use polling. The yet-merged R40 support will have this
issue as well, as the R40 is paired with the AXP221. But for now,
I'd like to have something that is easier to backport to stable, so
we can at least fix this for the A23 and A33.

Also, checkpatch.pl doesn't like the stable kernel prerequisite lines.

---
 drivers/phy/allwinner/phy-sun4i-usb.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index aa857be692cf..d5ae307ef4e1 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -410,11 +410,13 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
 		return true;
 
 	/*
-	 * The A31 companion pmic (axp221) does not generate vbus change
-	 * interrupts when the board is driving vbus, so we must poll
+	 * The A31/A23/A33 companion pmics (AXP221/AXP223) do not
+	 * generate vbus change interrupts when the board is driving
+	 * vbus using the N_VBUSEN pin on the pmic, so we must poll
 	 * when using the pmic for vbus-det _and_ we're driving vbus.
 	 */
-	if (data->cfg->type == sun6i_a31_phy &&
+	if ((data->cfg->type == sun6i_a31_phy ||
+	     data->cfg->type == sun8i_a33_phy) &&
 	    data->vbus_power_supply && data->phys[0].regulator_on)
 		return true;
 
@@ -885,7 +887,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
 
 static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
 	.num_phys = 2,
-	.type = sun4i_a10_phy,
+	.type = sun6i_a31_phy,
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
-- 
2.15.1




More information about the linux-arm-kernel mailing list