[PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander

Stefan Wahren stefan.wahren at i2se.com
Tue Jan 2 11:03:13 PST 2018


Hi Baruch,

> Baruch Siach <baruch at tkos.co.il> hat am 2. Januar 2018 um 14:19 geschrieben:
> 
> 
> Add a description of the RPi3 GPIO expander that the VC4 firmware controls.
> 
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> ---
>  arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> index b44b3b5af00d..09dca48da2bd 100644
> --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> @@ -23,6 +23,16 @@
>  			gpios = <&gpio 47 0>;
>  		};
>  	};
> +
> +	soc {

unfortunately this is a common issue of the RPi firmware drivers. These nodes shouldn't be child of the soc, because it's only bound for memory mapped IO. So please move it to the same level as soc. Otherwise we get more warnings with W=1 and Rob Herring gets unhappy.

> +		expgpio: expgpio {
> +			compatible = "brcm,bcm2835-expgpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			firmware = <&firmware>;

Please add the gpio-line-names from Eric's patch [1].

Thanks
Stefan

[1] - https://patchwork.kernel.org/patch/9339857/

> +			status = "okay";
> +		};
> +	};
>  };
>  
>  /* uart0 communicates with the BT module */
> -- 
> 2.15.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list