[PATCH v3 3/4] Document: dt: binding: imx: update clock doc for imx6sll

Jacky Bai ping.bai at nxp.com
Fri Feb 23 22:07:52 PST 2018


> Subject: Re: [PATCH v3 3/4] Document: dt: binding: imx: update clock doc for
> imx6sll
> 
> On Wed, Feb 07, 2018 at 10:00:18AM +0800, Bai Ping wrote:
> > Add clock binding doc update for imx6sll.
> >
> > Signed-off-by: Bai Ping <ping.bai at nxp.com>
> > ---
> > change from v2->v3:
> >  - remove the leading 0s
> >  - move the  imx6sll-clock.h to this patch.
> > ---
> >  .../devicetree/bindings/clock/imx6sll-clock.txt    |  37 ++++
> >  include/dt-bindings/clock/imx6sll-clock.h          | 204
> +++++++++++++++++++++
> >  2 files changed, 241 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> >  create mode 100644 include/dt-bindings/clock/imx6sll-clock.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > new file mode 100644
> > index 0000000..b5d272f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > @@ -0,0 +1,37 @@
> > +* Clock bindings for Freescale i.MX6 SLL
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,imx6sll-ccm"
> > +- reg: Address and length of the register set
> > +- #clock-cells: Should be <1>
> > +- clocks: list of clock specifiers, must contain an entry for each
> > +required
> > +  entry in clock-names
> > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> > +
> > +The clock consumer should specify the desired clock by having the
> > +clock ID in its "clocks" phandle cell.  See
> > +include/dt-bindings/clock/imx6sll-clock.h
> > +for the full list of i.MX6 SLL clock IDs.
> > +
> > +Examples:
> > +
> > +#include <dt-bindings/clock/imx6sll-clock.h>
> > +
> > +clks: ccm at 20c4000 {
> 
> s/ccm/clock-controller

OK, will fix it. 

> 
> > +		compatible = "fsl,imx6sll-ccm";
> > +		reg = <0x020c4000 0x4000>;
> > +		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> > +			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> > +		#clock-cells = <1>;
> > +		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
> > +		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; };
> > +
> > +uart1: serial at 2020000 {
> > +		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> > +		reg = <0x02020000 0x4000>;
> > +		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
> > +			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
> > +		clock-names = "ipg", "per";
> > +		status = "disabled";
> 
> The status line can be dropped in example.
> 

OK, will fix it.

> > +};
> > diff --git a/include/dt-bindings/clock/imx6sll-clock.h
> > b/include/dt-bindings/clock/imx6sll-clock.h
> > new file mode 100644
> > index 0000000..39c2567
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/imx6sll-clock.h
> > @@ -0,0 +1,204 @@
> > +/*
> > + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> 
> Can we use SPDX tag instead?  You can look at Lucas' i.MX8MQ clock patch for
> example, or document Documentation/process/license-rules.rst for details.
> 

Ok, will fix in next version. 

BR
Jacky Bai
> Shawn
> 
> > + *
> > + */
> > +
> > +#ifndef __DT_BINDINGS_CLOCK_IMX6SLL_H #define
> > +__DT_BINDINGS_CLOCK_IMX6SLL_H
> > +
> > +#define IMX6SLL_CLK_DUMMY		0
> > +#define IMX6SLL_CLK_CKIL		1
> > +#define IMX6SLL_CLK_OSC			2
> > +#define IMX6SLL_PLL1_BYPASS_SRC		3
> > +#define IMX6SLL_PLL2_BYPASS_SRC		4
> > +#define IMX6SLL_PLL3_BYPASS_SRC		5
> > +#define IMX6SLL_PLL4_BYPASS_SRC		6
> > +#define IMX6SLL_PLL5_BYPASS_SRC		7
> > +#define IMX6SLL_PLL6_BYPASS_SRC		8
> > +#define IMX6SLL_PLL7_BYPASS_SRC		9
> > +#define IMX6SLL_CLK_PLL1		10
> > +#define IMX6SLL_CLK_PLL2		11
> > +#define IMX6SLL_CLK_PLL3		12
> > +#define IMX6SLL_CLK_PLL4		13
> > +#define IMX6SLL_CLK_PLL5		14
> > +#define IMX6SLL_CLK_PLL6		15
> > +#define IMX6SLL_CLK_PLL7		16
> > +#define IMX6SLL_PLL1_BYPASS		17
> > +#define IMX6SLL_PLL2_BYPASS		18
> > +#define IMX6SLL_PLL3_BYPASS		19
> > +#define IMX6SLL_PLL4_BYPASS		20
> > +#define IMX6SLL_PLL5_BYPASS		21
> > +#define IMX6SLL_PLL6_BYPASS		22
> > +#define IMX6SLL_PLL7_BYPASS		23
> > +#define IMX6SLL_CLK_PLL1_SYS		24
> > +#define IMX6SLL_CLK_PLL2_BUS		25
> > +#define IMX6SLL_CLK_PLL3_USB_OTG	26
> > +#define IMX6SLL_CLK_PLL4_AUDIO		27
> > +#define IMX6SLL_CLK_PLL5_VIDEO		28
> > +#define IMX6SLL_CLK_PLL6_ENET		29
> > +#define IMX6SLL_CLK_PLL7_USB_HOST	30
> > +#define IMX6SLL_CLK_USBPHY1		31
> > +#define IMX6SLL_CLK_USBPHY2		32
> > +#define IMX6SLL_CLK_USBPHY1_GATE	33
> > +#define IMX6SLL_CLK_USBPHY2_GATE	34
> > +#define IMX6SLL_CLK_PLL2_PFD0		35
> > +#define IMX6SLL_CLK_PLL2_PFD1		36
> > +#define IMX6SLL_CLK_PLL2_PFD2		37
> > +#define IMX6SLL_CLK_PLL2_PFD3		38
> > +#define IMX6SLL_CLK_PLL3_PFD0		39
> > +#define IMX6SLL_CLK_PLL3_PFD1		40
> > +#define IMX6SLL_CLK_PLL3_PFD2		41
> > +#define IMX6SLL_CLK_PLL3_PFD3		42
> > +#define IMX6SLL_CLK_PLL4_POST_DIV	43
> > +#define IMX6SLL_CLK_PLL4_AUDIO_DIV	44
> > +#define IMX6SLL_CLK_PLL5_POST_DIV	45
> > +#define IMX6SLL_CLK_PLL5_VIDEO_DIV	46
> > +#define IMX6SLL_CLK_PLL2_198M		47
> > +#define IMX6SLL_CLK_PLL3_120M		48
> > +#define IMX6SLL_CLK_PLL3_80M		49
> > +#define IMX6SLL_CLK_PLL3_60M		50
> > +#define IMX6SLL_CLK_STEP		51
> > +#define IMX6SLL_CLK_PLL1_SW		52
> > +#define IMX6SLL_CLK_AXI_ALT_SEL		53
> > +#define IMX6SLL_CLK_AXI_SEL		54
> > +#define IMX6SLL_CLK_PERIPH_PRE		55
> > +#define IMX6SLL_CLK_PERIPH2_PRE		56
> > +#define IMX6SLL_CLK_PERIPH_CLK2_SEL	57
> > +#define IMX6SLL_CLK_PERIPH2_CLK2_SEL	58
> > +#define IMX6SLL_CLK_PERCLK_SEL		59
> > +#define IMX6SLL_CLK_USDHC1_SEL		60
> > +#define IMX6SLL_CLK_USDHC2_SEL		61
> > +#define IMX6SLL_CLK_USDHC3_SEL		62
> > +#define IMX6SLL_CLK_SSI1_SEL		63
> > +#define IMX6SLL_CLK_SSI2_SEL		64
> > +#define IMX6SLL_CLK_SSI3_SEL		65
> > +#define IMX6SLL_CLK_PXP_SEL		66
> > +#define IMX6SLL_CLK_LCDIF_PRE_SEL	67
> > +#define IMX6SLL_CLK_LCDIF_SEL		68
> > +#define IMX6SLL_CLK_EPDC_PRE_SEL	69
> > +#define IMX6SLL_CLK_SPDIF_SEL		70
> > +#define IMX6SLL_CLK_ECSPI_SEL		71
> > +#define IMX6SLL_CLK_UART_SEL		72
> > +#define IMX6SLL_CLK_ARM			73
> > +#define IMX6SLL_CLK_PERIPH		74
> > +#define IMX6SLL_CLK_PERIPH2		75
> > +#define IMX6SLL_CLK_PERIPH2_CLK2	76
> > +#define IMX6SLL_CLK_PERIPH_CLK2		77
> > +#define IMX6SLL_CLK_MMDC_PODF		78
> > +#define IMX6SLL_CLK_AXI_PODF		79
> > +#define IMX6SLL_CLK_AHB			80
> > +#define IMX6SLL_CLK_IPG			81
> > +#define IMX6SLL_CLK_PERCLK		82
> > +#define IMX6SLL_CLK_USDHC1_PODF		83
> > +#define IMX6SLL_CLK_USDHC2_PODF		84
> > +#define IMX6SLL_CLK_USDHC3_PODF		85
> > +#define IMX6SLL_CLK_SSI1_PRED		86
> > +#define IMX6SLL_CLK_SSI2_PRED		87
> > +#define IMX6SLL_CLK_SSI3_PRED		88
> > +#define IMX6SLL_CLK_SSI1_PODF		89
> > +#define IMX6SLL_CLK_SSI2_PODF		90
> > +#define IMX6SLL_CLK_SSI3_PODF		91
> > +#define IMX6SLL_CLK_PXP_PODF		92
> > +#define IMX6SLL_CLK_LCDIF_PRED		93
> > +#define IMX6SLL_CLK_LCDIF_PODF		94
> > +#define IMX6SLL_CLK_EPDC_SEL		95
> > +#define IMX6SLL_CLK_EPDC_PODF		96
> > +#define IMX6SLL_CLK_SPDIF_PRED		97
> > +#define IMX6SLL_CLK_SPDIF_PODF		98
> > +#define IMX6SLL_CLK_ECSPI_PODF		99
> > +#define IMX6SLL_CLK_UART_PODF		100
> > +
> > +/* CCGR 0 */
> > +#define IMX6SLL_CLK_AIPSTZ1		101
> > +#define IMX6SLL_CLK_AIPSTZ2		102
> > +#define IMX6SLL_CLK_DCP			103
> > +#define IMX6SLL_CLK_UART2_IPG		104
> > +#define IMX6SLL_CLK_UART2_SERIAL	105
> > +
> > +/* CCGR 1 */
> > +#define IMX6SLL_CLK_ECSPI1		106
> > +#define IMX6SLL_CLK_ECSPI2		107
> > +#define IMX6SLL_CLK_ECSPI3		108
> > +#define IMX6SLL_CLK_ECSPI4		109
> > +#define IMX6SLL_CLK_UART3_IPG		110
> > +#define IMX6SLL_CLK_UART3_SERIAL	111
> > +#define IMX6SLL_CLK_UART4_IPG		112
> > +#define IMX6SLL_CLK_UART4_SERIAL	113
> > +#define IMX6SLL_CLK_EPIT1		114
> > +#define IMX6SLL_CLK_EPIT2		115
> > +#define IMX6SLL_CLK_GPT_BUS		116
> > +#define IMX6SLL_CLK_GPT_SERIAL		117
> > +
> > +/* CCGR2 */
> > +#define IMX6SLL_CLK_CSI			118
> > +#define IMX6SLL_CLK_I2C1		119
> > +#define IMX6SLL_CLK_I2C2		120
> > +#define IMX6SLL_CLK_I2C3		121
> > +#define IMX6SLL_CLK_OCOTP		122
> > +#define IMX6SLL_CLK_LCDIF_APB		123
> > +#define IMX6SLL_CLK_PXP			124
> > +
> > +/* CCGR3 */
> > +#define IMX6SLL_CLK_UART5_IPG		125
> > +#define IMX6SLL_CLK_UART5_SERIAL	126
> > +#define IMX6SLL_CLK_EPDC_AXI		127
> > +#define IMX6SLL_CLK_EPDC_PIX		128
> > +#define IMX6SLL_CLK_LCDIF_PIX		129
> > +#define IMX6SLL_CLK_WDOG1		130
> > +#define IMX6SLL_CLK_MMDC_P0_FAST	131
> > +#define IMX6SLL_CLK_MMDC_P0_IPG		132
> > +#define IMX6SLL_CLK_OCRAM		133
> > +
> > +/* CCGR4 */
> > +#define IMX6SLL_CLK_PWM1		134
> > +#define IMX6SLL_CLK_PWM2		135
> > +#define IMX6SLL_CLK_PWM3		136
> > +#define IMX6SLL_CLK_PWM4		137
> > +
> > +/* CCGR 5 */
> > +#define IMX6SLL_CLK_ROM			138
> > +#define IMX6SLL_CLK_SDMA		139
> > +#define IMX6SLL_CLK_KPP			140
> > +#define IMX6SLL_CLK_WDOG2		141
> > +#define IMX6SLL_CLK_SPBA		142
> > +#define IMX6SLL_CLK_SPDIF		143
> > +#define IMX6SLL_CLK_SPDIF_GCLK		144
> > +#define IMX6SLL_CLK_SSI1		145
> > +#define IMX6SLL_CLK_SSI1_IPG		146
> > +#define IMX6SLL_CLK_SSI2		147
> > +#define IMX6SLL_CLK_SSI2_IPG		148
> > +#define IMX6SLL_CLK_SSI3		149
> > +#define IMX6SLL_CLK_SSI3_IPG		150
> > +#define IMX6SLL_CLK_UART1_IPG		151
> > +#define IMX6SLL_CLK_UART1_SERIAL	152
> > +
> > +/* CCGR 6 */
> > +#define IMX6SLL_CLK_USBOH3		153
> > +#define IMX6SLL_CLK_USDHC1		154
> > +#define IMX6SLL_CLK_USDHC2		155
> > +#define IMX6SLL_CLK_USDHC3		156
> > +
> > +#define IMX6SLL_CLK_IPP_DI0		157
> > +#define IMX6SLL_CLK_IPP_DI1		158
> > +#define IMX6SLL_CLK_LDB_DI0_SEL		159
> > +#define IMX6SLL_CLK_LDB_DI0_DIV_3_5	160
> > +#define IMX6SLL_CLK_LDB_DI0_DIV_7	161
> > +#define IMX6SLL_CLK_LDB_DI0_DIV_SEL	162
> > +#define IMX6SLL_CLK_LDB_DI0		163
> > +#define IMX6SLL_CLK_LDB_DI1_SEL		164
> > +#define IMX6SLL_CLK_LDB_DI1_DIV_3_5	165
> > +#define IMX6SLL_CLK_LDB_DI1_DIV_7	166
> > +#define IMX6SLL_CLK_LDB_DI1_DIV_SEL	167
> > +#define IMX6SLL_CLK_LDB_DI1		168
> > +#define IMX6SLL_CLK_EXTERN_AUDIO_SEL    169
> > +#define IMX6SLL_CLK_EXTERN_AUDIO_PRED   170
> > +#define IMX6SLL_CLK_EXTERN_AUDIO_PODF   171
> > +#define IMX6SLL_CLK_EXTERN_AUDIO        172
> > +
> > +#define IMX6SLL_CLK_END			173
> > +
> > +#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */
> > --
> > 1.9.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist
> >
> s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%7
> >
> Cping.bai%40nxp.com%7Ccc849c553d0440b4ec8e08d57b359fdb%7C686ea1d3
> bc2b4
> >
> c6fa92cd99c5c301635%7C0%7C0%7C636550392672754015&sdata=eUk%2BM
> NWxWfiBQ
> > AI1AZ7IxwqRrJxsFmOdJAJJBCtlxM8%3D&reserved=0



More information about the linux-arm-kernel mailing list