[PATCH 4/4] ARM: brcmstb: Add support for the V7 memory map

[Florian Fainelli]

From: Doug Berger <opendmb at gmail.com>

The 7278 device is the first device that includes support for the V7
memory map developed for use in 64-bit architecture brcmstb devices.
This map relocates the register physical offset from 0xF0000000 to
0x0000000008000000.

Since the ARM PERIPHBASE value is also relocated in the V7 memory map
we can use its value to determine whether this device uses the new
V7 memory map and therefore where to look for the SUN_TOP_CTRL
register used to identify the chip family.

Signed-off-by: Doug Berger <opendmb at gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 arch/arm/include/debug/brcmstb.S | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index c826f15d2f80..0f580caa81e5 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -11,20 +11,25 @@
  * GNU General Public License for more details.
  */
 #include <linux/serial_reg.h>
+#include <asm/cputype.h>
 
 /* Physical register offset and virtual register offset */
 #define REG_PHYS_BASE		0xf0000000
+#define REG_PHYS_BASE_V7	0x08000000
 #define REG_VIRT_BASE		0xfc000000
 #define REG_PHYS_ADDR(x)	((x) + REG_PHYS_BASE)
+#define REG_PHYS_ADDR_V7(x)	((x) + REG_PHYS_BASE_V7)
 
 /* Product id can be read from here */
 #define SUN_TOP_CTRL_BASE	REG_PHYS_ADDR(0x404000)
+#define SUN_TOP_CTRL_BASE_V7	REG_PHYS_ADDR_V7(0x404000)
 
 #define UARTA_3390		REG_PHYS_ADDR(0x40a900)
 #define UARTA_7250		REG_PHYS_ADDR(0x40b400)
 #define UARTA_7260		REG_PHYS_ADDR(0x40c000)
 #define UARTA_7268		UARTA_7260
 #define UARTA_7271		UARTA_7268
+#define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
 #define UARTA_7366		UARTA_7364
 #define UARTA_74371		REG_PHYS_ADDR(0x406b00)
@@ -55,8 +60,21 @@
 		mov	\rv, #0			@ yes; record init is done
 		str	\rv, [\tmp]
 
+		/* Check for V7 memory map if B53 */
+		mrc	p15, 0, \rv, c0, c0, 0	@ get Main ID register
+		ldr	\rp, =ARM_CPU_PART_MASK
+		and	\rv, \rv, \rp
+		ldr	\rp, =ARM_CPU_PART_BRAHMA_B53	@ check for B53 CPU
+		cmp	\rv, \rp
+		bne	10f
+
+		/* if PERIPHBASE doesn't overlap REG_PHYS_BASE use V7 map */
+		mrc	p15, 1, \rv, c15, c3, 0	@ get PERIPHBASE from CBAR
+		ands	\rv, \rv, #REG_PHYS_BASE
+		ldreq	\rp, =SUN_TOP_CTRL_BASE_V7
+
 		/* Check SUN_TOP_CTRL base */
-		ldr	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
+10:		ldrne	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
 		ldr	\rv, [\rp, #0]		@ get register contents
 ARM_BE8(	rev	\rv, \rv )
 		and	\rv, \rv, #0xffffff00	@ strip revision bits [7:0]
@@ -72,6 +90,7 @@ ARM_BE8(	rev	\rv, \rv )
 27:		checkuart(\rp, \rv, 0x07437100, 74371)
 28:		checkuart(\rp, \rv, 0x74390000, 7439)
 29:		checkuart(\rp, \rv, 0x74450000, 7445)
+30:		checkuart(\rp, \rv, 0x72780000, 7278)
 
 		/* No valid UART found */
 90:		mov	\rp, #0
-- 
2.14.1