[PATCH 07/15] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file

[Abhishek Sahu]

On 2018-01-29 10:41, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan at codeaurora.org>
> ---
>  arch/arm/boot/dts/Makefile                      | 1 +
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++++++
>  2 files changed, 9 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 21ed56d..1a8ab050 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-apq8084-mtp.dtb \
>  	qcom-ipq4019-ap.dk01.1-c1.dtb \
>  	qcom-ipq4019-ap.dk01.1-c2.dtb \
> +	qcom-ipq4019-ap.dk04.1-c1.dtb \
>  	qcom-ipq8064-ap148.dtb \
>  	qcom-msm8660-surf.dtb \
>  	qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
> new file mode 100644
> index 0000000..41123be
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk04.1.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
> +};

  It seems major diff between DK01 C1 and other variants is
  qpic nand. qpic nand is only available in C1 so do we need
  to disable the nand is base dk04 dtsi and enable it in this
  C1 dts only. same for qpic bam.

  Thanks,
  Abhishek