[PATCH 4/5] ARM: dts: stih410: Fix complain about IRQ_TYPE_NONE usage

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>

Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
 arch/arm/boot/dts/stih410.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 3313005ee15c..888548ea9b5c 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -43,7 +43,7 @@
 		ohci0: usb at 9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
 				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
@@ -58,7 +58,7 @@
 		ehci0: usb at 9a03e00 {
 			compatible = "st,st-ehci-300x";
 			reg = <0x9a03e00 0x100>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -75,7 +75,7 @@
 		ohci1: usb at 9a83c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
-			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
 				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
@@ -90,7 +90,7 @@
 		ehci1: usb at 9a83e00 {
 			compatible = "st,st-ehci-300x";
 			reg = <0x9a83e00 0x100>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -202,7 +202,7 @@
 				reg = <0x8d04000 0x1000>;
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names	= "irq";
 				clock-names = "pix",
 					      "tmds",
@@ -254,7 +254,7 @@
 		bdisp0:bdisp at 9f10000 {
 			compatible = "st,stih407-bdisp";
 			reg = <0x9f10000 0x1000>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "bdisp";
 			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
 		};
@@ -263,8 +263,8 @@
 			compatible = "st,st-hva";
 			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
 			reg-names = "hva_registers", "hva_esram";
-			interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
-				     <GIC_SPI 59 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_hva";
 			clocks = <&clk_s_c0_flexgen CLK_HVA>;
 		};
@@ -292,7 +292,7 @@
 			reg = <0x94a087c 0x64>;
 			clocks = <&clk_sysin>;
 			clock-names = "cec-clk";
-			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cec-irq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_cec0_default>;
-- 
1.9.1