[PATCH v5] ARM: imx: Update spi_imx platform data to reflect current state

[Shawn Guo]

On Mon, Apr 02, 2018 at 01:06:05PM -0700, Trent Piepho wrote:
> The docs for the spi_imx platform data still refer to a -32 offset used to
> specify a native chip select.  This was removed in commit 602c8f4485cd
> ("spi: imx: fix use of native chip-selects with devicetree") and no
> longer works as documented.  Update documentation.
> 
> The macro MXC_SPI_CS() is no longer is needed.
> 
> If a board uses all native chip selects, then it's not necessary to
> specify a chip select array at all, as all native is the default (this is
> how device-tree configured SPI masters work too).  Most of the spi-imx
> platform data users have their chip select arrays removed by this patch.
> 
> This patch also fixes a bug in mx31moboard introduced in the '602 commit.
> When that board was updated in commit 901f26bce64a ("ARM: imx: set
> correct chip_select in platform setup") to reflect the SPI change, only
> SPI bus 2 was updated and SPI bus 1 was left with non-sequential chip
> selects.  The mc13783 spi device on bus 1 had its chip select updated as
> if it were on bus 2.
> 
> CC: Shawn Guo <shawnguo at kernel.org>
> CC: Sascha Hauer <kernel at pengutronix.de>
> CC: Fabio Estevam <fabio.estevam at nxp.com>
> Acked-by: Greg Ungerer <gerg at linux-m68k.org>
> Reviewed-by: Oleksij Rempel <o.rempel at pengutronix.de>
> Signed-off-by: Trent Piepho <tpiepho at impinj.com>

Applied, thanks.