[PATCH 1/3] drm/panel: Add RGB666 variant of Innolux AT070TN92

Maxime Ripard maxime.ripard at bootlin.com
Tue Apr 10 23:28:35 PDT 2018


On Tue, Apr 10, 2018 at 11:31:27PM +0200, Paul Kocialkowski wrote:
> This adds timings for the RGB666 variant of the Innolux AT070TN92 panel,
> as found on the Ainol AW1 tablet.
> 
> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5591984a392b..efeb2f2162bc 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1063,6 +1063,29 @@ static const struct panel_desc innolux_at070tn92 = {
>  	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
>  };
>  
> +static const struct drm_display_mode innolux_at070tn92_rgb666_mode = {
> +	.clock = 40000,
> +	.hdisplay = 800,
> +	.hsync_start = 800 + 112,
> +	.hsync_end = 800 + 112 + 1,
> +	.htotal = 800 + 112 + 1 + 87,
> +	.vdisplay = 480,
> +	.vsync_start = 480 + 141,
> +	.vsync_end = 480 + 141 + 1,
> +	.vtotal = 480 + 141 + 1 + 38,
> +	.vrefresh = 60,
> +};

I'm not sure why you'd need different timings if the only difference
is the bus width.

> +static const struct panel_desc innolux_at070tn92_rgb666 = {
> +	.modes = &innolux_at070tn92_rgb666_mode,
> +	.num_modes = 1,
> +	.size = {
> +		.width = 154,
> +		.height = 86,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> +};
> +
>  static const struct display_timing innolux_g101ice_l01_timing = {
>  	.pixelclock = { 60400000, 71100000, 74700000 },
>  	.hactive = { 1280, 1280, 1280 },
> @@ -2105,6 +2128,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "innolux,at070tn92",
>  		.data = &innolux_at070tn92,
> +	}, {
> +		.compatible = "innolux,at070tn92-rgb666",
> +		.data = &innolux_at070tn92_rgb666,

And this isn't a different device, it's just the integration in the
board that is different, so you shouldn't have a different compatible
here, but rather something like the bus-width property documented in
the Documentation/devicetree/bindings/media/video-interfaces.txt file.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180411/3521a7ba/attachment-0001.sig>


More information about the linux-arm-kernel mailing list