[PATCH 1/2] clk: at91: Added more information logging.

Marcin marcin at ziemianowicz.com
Sun Apr 8 02:43:30 PDT 2018


I noticed that when debugging some USB clocking issue that there weren't
many ways to tell what the state of the USB clocking system was. This
adds a few logging statements to see what the relevant code is trying to
do.

Signed-off-by: Marcin Ziemianowicz <marcin at ziemianowicz.com>
---
 drivers/clk/at91/clk-pll.c   |  6 +++++-
 drivers/clk/at91/clk-usb.c   | 10 ++++++++--
 drivers/usb/host/ohci-at91.c | 21 +++++++++++++++------
 3 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 7d3223fc7161..534961766ae5 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -133,6 +133,7 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
 {
 	struct clk_pll *pll = to_clk_pll(hw);
 	unsigned int pllr;
+	unsigned long recalcedrate;
 	u16 mul;
 	u8 div;
 
@@ -144,7 +145,10 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
 	if (!div || !mul)
 		return 0;
 
-	return (parent_rate / div) * (mul + 1);
+	recalcedrate = (parent_rate / div) * (mul + 1);
+	pr_debug("clk-pll: calculating new rate, (%lu hz / %u) * %u = %lu hz\n",
+		parent_rate, div, mul, recalcedrate);
+	return recalcedrate;
 }
 
 static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 791770a563fc..2fa877e99bac 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -48,11 +48,15 @@ static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw,
 	struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
 	unsigned int usbr;
 	u8 usbdiv;
+	unsigned int calcdclock;
 
 	regmap_read(usb->regmap, AT91_PMC_USB, &usbr);
 	usbdiv = (usbr & AT91_PMC_OHCIUSBDIV) >> SAM9X5_USB_DIV_SHIFT;
 
-	return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
+	calcdclock = DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
+	pr_debug("clk-usb: calculating new rate, %lu hz / %u = %u hz\n",
+		parent_rate, usbdiv + 1, calcdclock);
+	return calcdclock;
 }
 
 static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
@@ -98,7 +102,6 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
 		if (!best_diff)
 			break;
 	}
-
 	if (best_rate < 0)
 		return best_rate;
 
@@ -142,6 +145,9 @@ static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (div > SAM9X5_USB_MAX_DIV + 1 || !div)
 		return -EINVAL;
 
+	pr_debug("clk-usb: setting USB clock divider to %lu hz / %lu = %lu hz\n",
+		parent_rate, div, rate);
+
 	regmap_update_bits(usb->regmap, AT91_PMC_USB, AT91_PMC_OHCIUSBDIV,
 			   (div - 1) << SAM9X5_USB_DIV_SHIFT);
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5ad9e9bdc8ee..5dfc4e464cfe 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -70,11 +70,12 @@ static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst =
 
 /*-------------------------------------------------------------------------*/
 
-static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91, struct device *dev)
 {
 	if (ohci_at91->clocked)
 		return;
 
+	dev_dbg(dev, "Enabling hclk, iclk, and setting fclk to 48 Mhz\n");
 	clk_set_rate(ohci_at91->fclk, 48000000);
 	clk_prepare_enable(ohci_at91->hclk);
 	clk_prepare_enable(ohci_at91->iclk);
@@ -82,11 +83,12 @@ static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
 	ohci_at91->clocked = true;
 }
 
-static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91, struct device *dev)
 {
 	if (!ohci_at91->clocked)
 		return;
 
+	dev_dbg(dev, "Disabling hclk, iclk, and fclk\n");
 	clk_disable_unprepare(ohci_at91->fclk);
 	clk_disable_unprepare(ohci_at91->iclk);
 	clk_disable_unprepare(ohci_at91->hclk);
@@ -104,12 +106,19 @@ static void at91_start_hc(struct platform_device *pdev)
 	/*
 	 * Start the USB clocks.
 	 */
-	at91_start_clock(ohci_at91);
+	at91_start_clock(ohci_at91, &pdev->dev);
 
 	/*
 	 * The USB host controller must remain in reset.
 	 */
 	writel(0, &regs->control);
+
+	/*
+	 * Say what the clocks are set to.
+	 */
+	dev_dbg(&pdev->dev, "hclk set to: %lu hz\n", clk_get_rate(ohci_at91->hclk));
+	dev_dbg(&pdev->dev, "iclk set to: %lu hz\n", clk_get_rate(ohci_at91->iclk));
+	dev_dbg(&pdev->dev, "fclk set to: %lu hz\n", clk_get_rate(ohci_at91->fclk));
 }
 
 static void at91_stop_hc(struct platform_device *pdev)
@@ -128,7 +137,7 @@ static void at91_stop_hc(struct platform_device *pdev)
 	/*
 	 * Stop the USB clocks.
 	 */
-	at91_stop_clock(ohci_at91);
+	at91_stop_clock(ohci_at91, &pdev->dev);
 }
 
 
@@ -623,7 +632,7 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
 
 		/* flush the writes */
 		(void) ohci_readl (ohci, &ohci->regs->control);
-		at91_stop_clock(ohci_at91);
+		at91_stop_clock(ohci_at91, dev);
 	}
 
 	return ret;
@@ -638,7 +647,7 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 	if (ohci_at91->wakeup)
 		disable_irq_wake(hcd->irq);
 
-	at91_start_clock(ohci_at91);
+	at91_start_clock(ohci_at91, dev);
 
 	ohci_resume(hcd, false);
 
-- 
2.16.3





More information about the linux-arm-kernel mailing list