[RFC RESEND 3/3] arm: dts: add Hi3521A dts

Marty E. Plummer hanetzer at startmail.com
Wed Sep 20 16:04:12 PDT 2017


On Wed, Sep 20, 2017 at 08:53:03PM +0000, Rob Herring wrote:
> On Sun, Sep 17, 2017 at 03:23:27AM -0500, Marty E. Plummer wrote:
> > Add hi3521a.dtsi and hi3521a-rs-dm290e.dts for RaySharp CCTV systems,
> > marketed under the name Samsung SDR-B74301N
> > 
> > Signed-off-by: Marty E. Plummer <hanetzer at startmail.com>
> > ---
> >  arch/arm/boot/dts/Makefile              |   2 +
> >  arch/arm/boot/dts/hi3521a-rs-dm290e.dts |  52 ++++++
> >  arch/arm/boot/dts/hi3521a.dtsi          | 310 ++++++++++++++++++++++++++++++++
> >  3 files changed, 364 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/hi3521a-rs-dm290e.dts
> >  create mode 100644 arch/arm/boot/dts/hi3521a.dtsi
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index faf46abaa4a2..e7b9b5dde20f 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -189,6 +189,8 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
> >  	gemini-sq201.dtb \
> >  	gemini-wbd111.dtb \
> >  	gemini-wbd222.dtb
> > +dtb-$(CONFIG_ARCH_HI3521A) += \
> > +	hi3521a-rs-dm290e.dtb
> >  dtb-$(CONFIG_ARCH_HI3xxx) += \
> >  	hi3620-hi4511.dtb
> >  dtb-$(CONFIG_ARCH_HIGHBANK) += \
> > diff --git a/arch/arm/boot/dts/hi3521a-rs-dm290e.dts b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts
> > new file mode 100644
> > index 000000000000..b32c8392c93f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts
> > @@ -0,0 +1,52 @@
> > +/*
> > + * Copyright (C) 2017 Marty Plummer <hanetzer at startmail.com>
> > + *
> > + * This program is free software: you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation, either version 3 of the License, or
> > + * (at your option) any later version.
> 
> Should be version 2 or later? Doesn't really matter to me from a DT 
> perspective, but it is in the kernel tree.
> 
> You can use SPDX tags if you want.
>
Oh, that's a good idea. I hadn't seen any SPDX tags in the tree that I
noticed before. I ended up just using the :Gpl command from neovim. 
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +/dts-v1/;
> > +#include "hi3521a.dtsi"
> > +
> > +/ {
> > +	model = "RaySharp RS-DM-290E DVR Board";
> > +	compatible = "hisilicon,hi3521a";
> 
> Needs a board compatible too.
>
Something like `compatible = "hisilicon,hi3521a", "raysharp,rs-dm-290e";` ? 
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +		serial1 = &uart1;
> > +		serial2 = &uart2;
> > +	};
> > +
> > +	memory {
> 
> Needs a unit-address.
>
Could you explain what you mean here? As in, memory at someaddr? What would
I use here? 
> > +		device_type = "memory";
> > +		reg = <0x80000000 0xf00000>;
> > +	};
> > +};
> > +
> > +&hi_sfc {
> > +	status = "okay";
> > +	spi-nor at 0 {
> > +		compatible = "jedec,spi-nor";
> 
> I don't remember offhand, but I think this should have a device specific 
> compatible too.
>
Instead of "jedec,spi-nor" ? Specific to the SPI chip? 
> > +		reg = <0>;
> > +		spi-max-frequency = <104000000>;
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	status = "okay";
> > +};
> > +
> > +&dual_timer0 {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm/boot/dts/hi3521a.dtsi b/arch/arm/boot/dts/hi3521a.dtsi
> > new file mode 100644
> > index 000000000000..2af746fdec46
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/hi3521a.dtsi
> > @@ -0,0 +1,310 @@
> > +/*
> > + * Copyright (C) 2017 Marty Plummer <hanetzer at startmail.com>
> > + *
> > + * This program is free software: you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation, either version 3 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include <dt-bindings/clock/hi3521a-clock.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +/ {
> > +	#address-cells = <1>;
> > +	#size-cells = <1>;
> > +	chosen { };
> > +
> > +	cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu0: cpu at 0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a7";
> > +			reg = <0>;
> > +		};
> > +	};
> > +
> > +	hi_sfc: spi-nor-controller at 10000000 {
> > +		compatible = "hisilicon,hi3521a-spi-nor", "hisilicon,fmc-spi-nor";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		reg = <0x10000000 0x10000>, <0x14000000 0x1000000>;
> > +		reg-names = "control", "memory";
> > +		clocks = <&crg HI3521A_FMC_CLK>;
> > +		status = "disabled";
> > +	};
> > +
> > +	gic: interrupt-controller at 10300000 {
> > +		compatible = "arm,pl390";
> > +		#interrupt-cells = <3>;
> > +		interrupt-controller;
> > +		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
> > +	};
> > +
> > +	clk_3m: clk_3m {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <3000000>;
> > +	};
> > +
> > +	crg: clock-reset-controller at 12040000 {
> > +		compatible = "hisilicon,hi3521a-crg";
> > +		#clock-cells = <1>;
> > +		#reset-cells = <2>;
> > +		reg = <0x12040000 0x10000>;
> > +	};
> 
> These memory mapped peripherals should be under a bus node.
>
Crap, will fix. 
> > +
> > +	soc {
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		compatible = "simple-bus";
> > +		interrupt-parent = <&gic>;
> > +		ranges;
> 
> It is preferred to have a value here and limit the range of the bus 
> addresses.
> 
Yeah, I think I've seen that before, I don't quite grok how that works.
> > +
> > +		dmac: dma at 10060000 {
> 
> dma-controller at ...
> 
Will fix.
> > +			compatible = "arm,pl080", "arm,primecell";
> > +			reg = <0x10060000 0x1000>;
> > +			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> 
> I wouldn't think enabling dma would be a per board decision.
> 
I've just noticed that in general dtsi files just lay it all out and are
mostly "disabled", though if you think this should be explicitly enabled
thats fine by me.
> > +		};
> > +
> > +		dual_timer0: timer at 12000000 {
> > +			compatible = "arm,sp804", "arm,primecell";
> > +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> > +			reg = <0x12000000 0x1000>;
> > +			clocks = <&clk_3m>;
> > +			clock-names = "apb_pclk";
> 
> IIRC, it is deprecated to have a single clock here. The h/w has 2 clock 
> inputs.
>
Are you meaning for the 0x0 index and 0x20 index clocks?
> Where's the ARM architected timer?
> 
Unsure tbqf, just doing my best to translate a datasheet into code. Do
all ARM soc's have one?
> > -- 
> > 2.14.1
> > 



More information about the linux-arm-kernel mailing list