[PATCH 3/3] drm/exynos/gsc: Add rotation hardware limits of gscaler

Hoegeun Kwon hoegeun.kwon at samsung.com
Wed Sep 6 22:16:13 PDT 2017


On 09/04/2017 03:19 PM, Hoegeun Kwon wrote:
> On 09/01/2017 04:31 PM, Marek Szyprowski wrote:
>> Hi Hoegeun,
>>
>> On 2017-09-01 03:47, Hoegeun Kwon wrote:
>>> The gscaler has hardware rotation limits that need to be imported from
>>> dts. Parse them and add them to the property list.
>>>
>>> The rotation hardware limits are related to the cropped source size.
>>> When swap occurs, use rot_max size instead of crop_max size.
>>>
>>> Also the scaling limits are related to post size, use pos size to
>>> check the limits.
>>>
>>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
>>> ---
>>>   drivers/gpu/drm/exynos/exynos_drm_gsc.c | 63 
>>> +++++++++++++++++++++------------
>>>   include/uapi/drm/exynos_drm.h           |  2 ++
>>>   2 files changed, 42 insertions(+), 23 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c 
>>> b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
>>> index 0506b2b..dd9b057 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
>>> @@ -1401,6 +1401,23 @@ static int gsc_ippdrv_check_property(struct 
>>> device *dev,
>>>       bool swap;
>>>       int i;
>>>   +    config = &property->config[EXYNOS_DRM_OPS_DST];
>>> +
>>> +    /* check for degree */
>>> +    switch (config->degree) {
>>> +    case EXYNOS_DRM_DEGREE_90:
>>> +    case EXYNOS_DRM_DEGREE_270:
>>> +        swap = true;
>>> +        break;
>>> +    case EXYNOS_DRM_DEGREE_0:
>>> +    case EXYNOS_DRM_DEGREE_180:
>>> +        swap = false;
>>> +        break;
>>> +    default:
>>> +        DRM_ERROR("invalid degree.\n");
>>> +        goto err_property;
>>> +    }
>>> +
>>>       for_each_ipp_ops(i) {
>>>           if ((i == EXYNOS_DRM_OPS_SRC) &&
>>>               (property->cmd == IPP_CMD_WB))
>>> @@ -1416,21 +1433,6 @@ static int gsc_ippdrv_check_property(struct 
>>> device *dev,
>>>               goto err_property;
>>>           }
>>>   -        /* check for degree */
>>> -        switch (config->degree) {
>>> -        case EXYNOS_DRM_DEGREE_90:
>>> -        case EXYNOS_DRM_DEGREE_270:
>>> -            swap = true;
>>> -            break;
>>> -        case EXYNOS_DRM_DEGREE_0:
>>> -        case EXYNOS_DRM_DEGREE_180:
>>> -            swap = false;
>>> -            break;
>>> -        default:
>>> -            DRM_ERROR("invalid degree.\n");
>>> -            goto err_property;
>>> -        }
>>> -
>>>           /* check for buffer bound */
>>>           if ((pos->x + pos->w > sz->hsize) ||
>>>               (pos->y + pos->h > sz->vsize)) {
>>> @@ -1438,21 +1440,27 @@ static int gsc_ippdrv_check_property(struct 
>>> device *dev,
>>>               goto err_property;
>>>           }
>>>   +        /*
>>> +         * The rotation hardware limits are related to the cropped
>>> +         * source size. So use rot_max size to check the limits when
>>> +         * swap happens. And also the scaling limits are related to 
>>> pos
>>> +         * size, use pos size to check the limits.
>>> +         */
>>>           /* check for crop */
>>>           if ((i == EXYNOS_DRM_OPS_SRC) && (pp->crop)) {
>>>               if (swap) {
>>>                   if ((pos->h < pp->crop_min.hsize) ||
>>> -                    (sz->vsize > pp->crop_max.hsize) ||
>>> +                    (pos->h > pp->rot_max.hsize) ||
>>>                       (pos->w < pp->crop_min.vsize) ||
>>> -                    (sz->hsize > pp->crop_max.vsize)) {
>>> +                    (pos->w > pp->rot_max.vsize)) {
>>>                       DRM_ERROR("out of crop size.\n");
>>>                       goto err_property;
>>>                   }
>>>               } else {
>>>                   if ((pos->w < pp->crop_min.hsize) ||
>>> -                    (sz->hsize > pp->crop_max.hsize) ||
>>> +                    (pos->w > pp->crop_max.hsize) ||
>>>                       (pos->h < pp->crop_min.vsize) ||
>>> -                    (sz->vsize > pp->crop_max.vsize)) {
>>> +                    (pos->h > pp->crop_max.vsize)) {
>>>                       DRM_ERROR("out of crop size.\n");
>>>                       goto err_property;
>>>                   }
>>> @@ -1463,17 +1471,17 @@ static int gsc_ippdrv_check_property(struct 
>>> device *dev,
>>>           if ((i == EXYNOS_DRM_OPS_DST) && (pp->scale)) {
>>>               if (swap) {
>>>                   if ((pos->h < pp->scale_min.hsize) ||
>>> -                    (sz->vsize > pp->scale_max.hsize) ||
>>> +                    (pos->h > pp->scale_max.hsize) ||
>>>                       (pos->w < pp->scale_min.vsize) ||
>>> -                    (sz->hsize > pp->scale_max.vsize)) {
>>> +                    (pos->w > pp->scale_max.vsize)) {
>>>                       DRM_ERROR("out of scale size.\n");
>>>                       goto err_property;
>>>                   }
>>>               } else {
>>>                   if ((pos->w < pp->scale_min.hsize) ||
>>> -                    (sz->hsize > pp->scale_max.hsize) ||
>>> +                    (pos->w > pp->scale_max.hsize) ||
>>>                       (pos->h < pp->scale_min.vsize) ||
>>> -                    (sz->vsize > pp->scale_max.vsize)) {
>>> +                    (pos->h > pp->scale_max.vsize)) {
>>>                       DRM_ERROR("out of scale size.\n");
>>>                       goto err_property;
>>>                   }
>>> @@ -1676,6 +1684,15 @@ static int gsc_probe(struct platform_device 
>>> *pdev)
>>>               dev_warn(dev, "failed to get system register.\n");
>>>               ctx->sysreg = NULL;
>>>           }
>>> +
>>> +        ret = of_property_read_u32(dev->of_node, "rot-max-hsize",
>>> +                &ctx->ippdrv.prop_list.rot_max.hsize);
>>> +        ret |= of_property_read_u32(dev->of_node, "rot-max-vsize",
>>> +                &ctx->ippdrv.prop_list.rot_max.vsize);
>>> +        if (ret) {
>>> +            dev_err(dev, "rot-max property should be provided by 
>>> device tree.\n");
>>> +            return -EINVAL;
>>> +        }
>>>       }
>>>         /* clock control */
>>> diff --git a/include/uapi/drm/exynos_drm.h 
>>> b/include/uapi/drm/exynos_drm.h
>>> index cb3e9f9..d5d5518 100644
>>> --- a/include/uapi/drm/exynos_drm.h
>>> +++ b/include/uapi/drm/exynos_drm.h
>>> @@ -192,6 +192,7 @@ enum drm_exynos_planer {
>>>    * @crop_max: crop max resolution.
>>>    * @scale_min: scale min resolution.
>>>    * @scale_max: scale max resolution.
>>> + * @rot_max: rotation max resolution.
>>>    */
>>>   struct drm_exynos_ipp_prop_list {
>>>       __u32    version;
>>> @@ -210,6 +211,7 @@ struct drm_exynos_ipp_prop_list {
>>>       struct drm_exynos_sz    crop_max;
>>>       struct drm_exynos_sz    scale_min;
>>>       struct drm_exynos_sz    scale_max;
>>> +    struct drm_exynos_sz    rot_max;
>>>   };
>>>     /**
>>
>> IMO maximum supported picture size should be hardcoded into driver, 
>> there
>> is no need to add device tree properties for that. Please also check 
>> v4l2
>> driver for Exynos GSC.
>>
>> Currently it uses only one compatible - "exynos5-gsc", but imho You 
>> should
>> simply replace it with "exynos5250-gsc" and "exynos5420-gsc", and add 
>> those
>> variants with proper maximum supported size (2047 and 2016 
>> respectively).
>>
>> Best regards
>
> Hi Krzysztof and Marek,
>
> Thanks Krzysztof and Marek reviews.
>
> As Marek says, rot_max size will be hardcoded into driver,
> then it will not break the ABI. And also,
> I will check the v4l2 driver for Exynos GSC.
>
> Best regards,
> Hoegeun
>

Hi Marek,

I have checked v4l2 driver for Exynos GSC. The v4l2 driver supports
Exynos 5250 and 5433 GSC. Currently, the hardware limits rotation is
set to 2047 in the v4l2 driver.

In my opinion don't need to fix it, because the Exynos 5250 has a
hardware rotation limits of 2048 and the Exynos 5250 has a hardware
rotation limits of 2047.

Please tell me if you have any other opinion.

Best regards,
Hoegeun




More information about the linux-arm-kernel mailing list