[RESEND PATCH] ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC

Li Yang leoyang.li at nxp.com
Wed Oct 25 14:00:36 PDT 2017


On Tue, Sep 12, 2017 at 1:49 AM, SZ Lin <sz.lin at moxa.com> wrote:
> Add QSPI node support, and this function is disabled by default
> This setting could be overwritten in board-level definitions

Adding Shawn Guo.

>
> Signed-off-by: SZ Lin <sz.lin at moxa.com>

Acked-by: Li Yang <leoyang.li at nxp.com>

> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 7bb9df2c1460..9da876e47810 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -154,6 +154,20 @@
>                         big-endian;
>                 };
>
> +               qspi: quadspi at 1550000 {
> +                       compatible = "fsl,ls1021a-qspi";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0x0 0x1550000 0x0 0x10000>,
> +                             <0x0 0x40000000 0x0 0x40000000>;
> +                       reg-names = "QuadSPI", "QuadSPI-memory";
> +                       interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +                       clock-names = "qspi_en", "qspi";
> +                       clocks = <&clockgen 4 1>, <&clockgen 4 1>;
> +                       big-endian;
> +                       status = "disabled";
> +               };
> +
>                 esdhc: esdhc at 1560000 {
>                         compatible = "fsl,esdhc";
>                         reg = <0x0 0x1560000 0x0 0x10000>;
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the linux-arm-kernel mailing list