[PATCH v7 3/6] ARM: smp_scu: allow the platform code to read the SCU CPU status

Russell King - ARM Linux linux at armlinux.org.uk
Mon Oct 23 02:54:50 PDT 2017


On Sun, Sep 17, 2017 at 06:45:20PM +0200, Martin Blumenstingl wrote:
> On Amlogic Meson8 / Meson8m2 (both Cortex-A9) and Meson8b (Cortex-A5)
> the CPU hotplug code needs to wait until the SCU status of the CPU that
> is being taken offline is SCU_PM_POWEROFF.
> Provide a utility function (which can be invoked for example from
> .cpu_kill()) which allows reading the SCU status of a CPU.
> 
> While here, replace the magic number 0x3 with a preprocessor macro
> (SCU_CPU_STATUS_MASK) so we don't have to duplicate this magic number in
> the new function.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>

Acked-by: Russell King <rmk+kernel at armlinux.org.uk>

> ---
>  arch/arm/include/asm/smp_scu.h |  6 ++++++
>  arch/arm/kernel/smp_scu.c      | 18 +++++++++++++++++-
>  2 files changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
> index 4c47bdfd4f61..1529d1ae2f8d 100644
> --- a/arch/arm/include/asm/smp_scu.h
> +++ b/arch/arm/include/asm/smp_scu.h
> @@ -28,6 +28,7 @@ static inline unsigned long scu_a9_get_base(void)
>  unsigned int scu_get_core_count(void __iomem *);
>  int scu_power_mode(void __iomem *, unsigned int);
>  int scu_cpu_power_enable(void __iomem *, unsigned int);
> +int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu);
>  #else
>  static inline unsigned int scu_get_core_count(void __iomem *scu_base)
>  {
> @@ -42,6 +43,11 @@ static inline int scu_cpu_power_enable(void __iomem *scu_base,
>  {
>  	return -EINVAL;
>  }
> +static inline int scu_get_cpu_power_mode(void __iomem *scu_base,
> +					 unsigned int logical_cpu)
> +{
> +	return -EINVAL;
> +}
>  #endif
>  
>  #if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU)
> diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
> index 1d549c16b5fc..c6b33074c393 100644
> --- a/arch/arm/kernel/smp_scu.c
> +++ b/arch/arm/kernel/smp_scu.c
> @@ -21,6 +21,7 @@
>  #define SCU_STANDBY_ENABLE	(1 << 5)
>  #define SCU_CONFIG		0x04
>  #define SCU_CPU_STATUS		0x08
> +#define SCU_CPU_STATUS_MASK	GENMASK(1, 0)
>  #define SCU_INVALIDATE		0x0c
>  #define SCU_FPGA_REVISION	0x10
>  
> @@ -82,7 +83,8 @@ static int scu_set_power_mode_internal(void __iomem *scu_base,
>  	if (mode > 3 || mode == 1 || cpu > 3)
>  		return -EINVAL;
>  
> -	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
> +	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
> +	val &= ~SCU_CPU_STATUS_MASK;
>  	val |= mode;
>  	writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
>  
> @@ -109,3 +111,17 @@ int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu)
>  {
>  	return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL);
>  }
> +
> +int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu)
> +{
> +	unsigned int val;
> +	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
> +
> +	if (cpu > 3)
> +		return -EINVAL;
> +
> +	val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
> +	val &= SCU_CPU_STATUS_MASK;
> +
> +	return val;
> +}
> -- 
> 2.14.1
> 

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up



More information about the linux-arm-kernel mailing list