[PATCH 15/42] ARM: dts: r8a7743: Add HS-USB device node

Simon Horman horms+renesas at verge.net.au
Fri Oct 20 03:28:42 PDT 2017


From: Biju Das <biju.das at bp.renesas.com>

Define the R8A7743 generic part of the HS-USB device node. It is up to the
board file to enable the device.

Signed-off-by: Biju Das <biju.das at bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2 at renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index d541fd9ffafb..080eff9bb3c3 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -945,6 +945,20 @@
 			status = "disabled";
 		};
 
+		hsusb: usb at e6590000 {
+			compatible = "renesas,usbhs-r8a7743",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		usbphy: usb-phy at e6590100 {
 			compatible = "renesas,usb-phy-r8a7743",
 				     "renesas,rcar-gen2-usb-phy";
-- 
2.11.0




More information about the linux-arm-kernel mailing list