[RFC v2 0/8] Acer Chromebook R13 support

Ulrich Hecht ulrich.hecht+renesas at gmail.com
Wed Oct 18 07:53:54 PDT 2017


On Tue, Oct 17, 2017 at 6:05 PM, Sean Paul <seanpaul at chromium.org> wrote:
> On Tue, Oct 17, 2017 at 12:33:09PM +0200, Matthias Brugger wrote:
>> From what I understand you
>> rebased the patches from the chromium kernel to mainline. So you should keep
>> the signed-off-by from the original author and just add you signed-off-by
>> below that.
>> Also it would be nice to CC these persons so that they are aware of your effort.
>>
> Additionally, make sure the author and commit messages are preserved when you send
> patches. You can add your own message in addition to your SoB, but please try to
> preserve history.

Fair enough, but I'm not sure what exactly to include. The chromium
commits include, among other things:

- bugtracker numbers and test cases
- "Change-Id" and "Commit-Ready" (no idea what those are)
- "Reviewed-on", containing links to chromium-review.googlesource.com

With all changes to the PS8640 driver concatenated and non-standard
tags removed, the commit message would look like this:

=============================
    CHROMIUM: drm/bridge: Add I2C based driver for ps8640 bridge

    This patch adds drm_bridge driver for parade DSI to eDP bridge chip.

    Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
    (am from https://patchwork.kernel.org/patch/8357851/)
    Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
    Tested-by: cawa cheng <cawa.cheng at mediatek.com>
    Tested-by: Daniel Kurtz <djkurtz at chromium.org>
    Reviewed-by: Nicolas Boichat <drinkcat at chromium.org>


    FIXUP: FROMLIST: drm/bridge: Add I2C based driver for ps8640 bridge

    chromeos-3.18 currently has FROMLIST v15 of the PS8640 driver.
    This version is incompatible with UPSTREAM version of the Mediatek
    DRM driver.

    To quote Philipp Zabel:
    "The main DRM driver mtk_drm_drv now calls
    drm_connector_register_all() after drm_dev_register() in the
    mtk_drm_bind() function. That function should iterate over all
    connectors and call drm_connector_register() for each of them.
    The call to drm_connector_init() from mtk_hdmi_bridge_attach()
    should be enough to make this happen.

    The drm_connector_(un)register calls also have to be removed
    from the ps8640 driver."

    Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
    Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
    Tested-by: PC Liao <pc.liao at mediatek.com>
    Tested-by: Daniel Kurtz <djkurtz at chromium.org>
    Tested-by: Nicolas Boichat <drinkcat at chromium.org>
    Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>


    CHROMIUM: drm/bridge: ps8640: Add a 3 ms delay before unmuting output

    For current ps8640 firmware, the PS_GPIO9 signal only indicates the bridge
    has seen the attached panel's HPD signal and read its EDID.  Unfortunately,
    the bridge may not yet be ready to properly handle DSI/eDP traffic yet.

    For now, Paradetech has recommended adding a 3 ms delay after PS_GPIO9
    before starting video signal transmission.

    Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
    Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>

    Tested-by: cawa cheng <cawa.cheng at mediatek.com>
    Tested-by: Daniel Kurtz <djkurtz at chromium.org>
    Tested-by: jitao shi <jitao.shi at mediatek.com>
    Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
    Reviewed-by: jitao shi <jitao.shi at mediatek.com>


    CHROMIUM: drm/bridge: ps8640: disable MIPI MCS

    Disable PS8640 MIPI MCS commands to workaround an issue where normal
    MIPI DSI signals are sometimes recognized as an MSC command that can,
    for example, disable the bridge output.

    Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
    Tested-by: Daniel Kurtz <djkurtz at chromium.org>
    Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>


    CHROMIUM: drm/bridge: ps8640: Use individual regulators instead of bulk

    According to the latest information from Parade, the PS8640 1.2 V
    supply must be enabled before 3.3 V.
    So, split the bulk regulator into separate individual regulators that
    can be enabled independently.

    Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>

    Tested-by: Daniel Kurtz <djkurtz at chromium.org>
    Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>


    CHROMIUM: drm/bridge: ps8640: add 5ms delay between v12 and v33

    According to Parade, the PS8640 1.2V must be enabled 5 ms before its
    3.3V. Otherwise, the PS8650 MCU may hang, and its settings cannot be
    written correctly, leading to a black screen.

    Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
    Tested-by: Daniel Kurtz <djkurtz at chromium.org>
    Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
=============================

That keeps chronology and attribution intact, but is somewhat
redundant. Any suggestions on how to digest it? Or should I just add
it as is?

CU
Uli



More information about the linux-arm-kernel mailing list