[PATCH 15/16] arm64: dts: marvell: armada-3720-db: enable second UART port

Miquel Raynal miquel.raynal at free-electrons.com
Fri Oct 6 03:13:43 PDT 2017


Enable Armada-3720-DB second UART port by adding the corresponding
device tree node in the board DTS and enabling it.

Signed-off-by: Miquel Raynal <miquel.raynal at free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 9df0f06ce607..15713c19b3d0 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -216,7 +216,7 @@
 
 /*
  * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
- * an FTDI
+ * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
  */
 &uart0 {
 	pinctrl-names = "default";
@@ -224,6 +224,13 @@
 	status = "okay";
 };
 
+/* CON26(V2.0)/CON28(V1.4) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
 /* CON27(V2.0)/CON29(V1.4) */
 &usb2 {
 	status = "okay";
-- 
2.11.0




More information about the linux-arm-kernel mailing list