[PATCH v2 7/8] arm64: dts: renesas: initial Eagle board device tree

[Simon Horman]

On Wed, Oct 04, 2017 at 01:10:26PM +0200, Geert Uytterhoeven wrote:
> Hi Sergei,
> 
> On Wed, Oct 4, 2017 at 1:03 PM, Sergei Shtylyov
> <sergei.shtylyov at cogentembedded.com> wrote:
> > On 9/21/2017 4:18 PM, Geert Uytterhoeven wrote:
> >>> Add the initial device  tree for  the R8A77970 SoC based Eagle board.
> >>> The board has 1 debug serial port (SCIF0); include support for it,
> >>> so that the serial console can work.
> >>>
> >>> Based on the original (and large) patch by Vladimir Barinov
> >>> <vladimir.barinov at cogentembedded.com>.
> >>>
> >>> Signed-off-by: Vladimir Barinov <vladimir.barinov at cogentembedded.com>
> >>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
> >>
> >> Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
> >>
> >>> --- /dev/null
> >>> +++ renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> 
> >>> +&extal_clk {
> >>> +       clock-frequency = <16666666>;
> >>
> >>
> >> Nitpicking: the schematics say 16.6666 MHz
> >> At 100 ppm accuracy that's the same, though.
> >
> >    So, you still want me to change this freq?
> 
> I don't think that's really needed, as the difference is smaller than the
> accuracy anyway.

Thanks, I have applied this patch for v4.15.